critic
发表于 2025-3-23 09:52:01
Thick Cylinders,mple analysis that ignored the variation of radial stress. When the wall thickness becomes appreciable in proportion to the cylinder radius, this variation in radial stress must be taken into account in order to determine the correct distribution of stresses. The theory is due to the French military engineer and mathematician, G. Lamé.
GRE
发表于 2025-3-23 17:42:58
Columns, general type of column carries both axial and transverse forces. The presence of the axial force and transverse deflexions produces bending moments in the column that are proportional to the transverse deflexions and although the column material may be linearly elastic, the resulting deflexions are non-linear with respect to the loads.
PON
发表于 2025-3-23 20:08:15
http://reply.papertrans.cn/32/3156/315537/315537_13.png
包庇
发表于 2025-3-24 00:32:10
Constitutionalism Under Extreme Conditionsf the stress will depend upon the way in which the loads are applied and on the geometric properties of the cross-section. In general, a member may be required to sustain axial forces, bending moments, shear forces and torques taken individually or in combination with each other. In this chapter how
缝纫
发表于 2025-3-24 06:20:29
http://reply.papertrans.cn/32/3156/315537/315537_15.png
HUMID
发表于 2025-3-24 06:54:55
https://doi.org/10.1007/978-94-017-1147-0s due to axial load, bending stress due to moment, or shear stress due to torque) or to a combination of force actions (axial load and moment) which produce stresses acting uniaxially, the resultant of which may be obtained by algebraic addition.
剥皮
发表于 2025-3-24 14:13:15
https://doi.org/10.1007/978-1-4612-3314-5mple analysis that ignored the variation of radial stress. When the wall thickness becomes appreciable in proportion to the cylinder radius, this variation in radial stress must be taken into account in order to determine the correct distribution of stresses. The theory is due to the French military
匍匐
发表于 2025-3-24 18:10:28
https://doi.org/10.1057/9781137263254 general type of column carries both axial and transverse forces. The presence of the axial force and transverse deflexions produces bending moments in the column that are proportional to the transverse deflexions and although the column material may be linearly elastic, the resulting deflexions are
Recess
发表于 2025-3-24 20:31:03
http://reply.papertrans.cn/32/3156/315537/315537_19.png
Decimate
发表于 2025-3-24 23:50:37
Constitutionalism and Legal ReasoningWe have seen in the previous chapter that axial loads produce normal stresses. Torques and shear forces on the other hand induce shear stresses. Although we shall not be concerned with shear forces in this chapter, it will be useful to refer to shear force in order to introduce the concept of shear stress.