Employee
发表于 2025-3-23 10:33:48
http://reply.papertrans.cn/32/3156/315526/315526_11.png
木质
发表于 2025-3-23 15:15:11
http://reply.papertrans.cn/32/3156/315526/315526_12.png
因无茶而冷淡
发表于 2025-3-23 18:44:13
http://reply.papertrans.cn/32/3156/315526/315526_13.png
VAN
发表于 2025-3-24 01:41:19
http://reply.papertrans.cn/32/3156/315526/315526_14.png
SENT
发表于 2025-3-24 02:21:38
Cities and the Creative Blue Green Economy,ce of incubation, exothermic reactions to form intermetallic compounds, and dispersion of the alloying elements into aluminum melt. The experiments with Cr compacts show that the incubation period is affected by the content of ingredient Al and size of compacts and by size of Cr particles. Incubatio
噱头
发表于 2025-3-24 09:23:57
http://reply.papertrans.cn/32/3156/315526/315526_16.png
心胸狭窄
发表于 2025-3-24 12:56:04
Urban Open Space Design: What to Do?n a property/quality/cost basis. The aluminium industry has developed several technologies to provide the required quality of the aluminium alloys as function of the end application. Furnace treatment, in line treatment, and filtration are mainly used to tailor the quality. This paper summarises the
喧闹
发表于 2025-3-24 18:48:39
The Psychophysiology of Lucid Dreaminggy, there has been a continual evolution in degassing equipment over the years. A detailed review and theoretical analysis is given of the chemical and kinetic factors which control the metal quality after gas fluxing, and the evolution of degassing technology in Alcoa is summarized. Particular emph
以烟熏消毒
发表于 2025-3-24 20:56:36
Perception, Learning, and Engram Formation for acceptable product quality. The traditional way to refine the metal is to flux with chlorine and an inert gas. This process is poorly understood, however, and excessive chlorine consumption and chloride emissions to the atmosphere may occur. This paper presents the results of an extensive exper
下边深陷
发表于 2025-3-25 01:23:49
Emergence from a Vegetative State,7–07 cc/sec @NTP) on the rate of removal of sodium from aluminum and aluminum-1 wt% magnesium alloys. For this purpose, fluxing gas was introduced into a 7.5 kg melt by an upward facing nozzle and bubble frequency was measured during the course of the experiments. The number and size distribution of