Externalize
发表于 2025-3-30 09:57:20
,Überlegungen zur Interaktion im Netz,occurs on the spacer, which is a great threat to the application of HVDC GIS and the safety of entire grid. Moreover, the influence on surface charge dynamic behavior under pulse voltage produced by switch overvoltage, accompanying with the DC voltage, is still unclear. In order to research the comp
狂怒
发表于 2025-3-30 14:07:00
The Mind: We Interpret, We Imagineoccurs on the spacer, which is a great threat to the application of GIS and the safety of entire grid. Moreover, the influences on surface charge under pulse voltage produced by switch overvoltage, accompanying with the AC voltage, are still unclear. In order to research the comprehensive effect of
令人不快
发表于 2025-3-30 19:00:51
http://reply.papertrans.cn/32/3134/313397/313397_53.png
scoliosis
发表于 2025-3-30 23:16:20
https://doi.org/10.1057/9781137463357tes were investigated. With the rise of ambient temperature, the surface discharge strength of epoxy resin decreases and the conductivity shows significant increase. The charges obtain higher energy, their movement becomes more violent and makes it easier for secondary electron emission avalanche. M
Recessive
发表于 2025-3-31 01:41:05
Introduction: Frictive Pictures.1 MPa SF. and air. Under a low electric field, the surface charge accumulation is dominated by the bulk conduction of the spacer. As the charging voltage increases, gas ionization occurs in the localized strong electric field, taking over the dominant position. In 0.1 MPa SF. gas, flashovers typica
宣誓书
发表于 2025-3-31 06:48:08
Animism and Philosophy of Religiontain a more uniform electric field distribution, this chapter proposes the concept of the d-SFGM insulator, i.e., applying the surface functionally graded material (SFGM) with a designed thickness (.) distribution of high permittivity along the insulator surface. The magnetron sputtering technique w
托运
发表于 2025-3-31 11:47:14
Janine Randerson,Rachel ShearerSFGM) is proposed in this chapter, and the continuously graded high-. layer was fabricated by depositing BaTiO. on the insulator surface. The iterative method was introduced to optimize the thickness distribution of the BaTiO. layer. After four iterations, the layer thickness distribution almost rea
十字架
发表于 2025-3-31 16:30:21
https://doi.org/10.1007/978-3-031-51346-6 (FGM) have attempted to homogenize the electrical field distribution along the gas–solid interface; however, the complicated fabrication process and huge dielectric loss makes it difficult into industrial application. This chapter proposed a novel concept as that a spacer with functional surface wa