领巾
发表于 2025-3-28 16:08:44
http://reply.papertrans.cn/32/3125/312463/312463_41.png
粗糙
发表于 2025-3-28 21:50:20
https://doi.org/10.1007/978-3-663-13867-9as. However, catalysts in DRM have usually problems of being deactivated during the reaction, due to thermal sintering at high temperatures (700–950 °C) or due to solid carbon deposition. This paper mostly focuses on the stability of a hydroxyapatite-supported nickel catalyst and its generation in DRM reaction.
Anthem
发表于 2025-3-29 02:02:03
http://reply.papertrans.cn/32/3125/312463/312463_43.png
placebo
发表于 2025-3-29 05:12:54
http://reply.papertrans.cn/32/3125/312463/312463_44.png
暗讽
发表于 2025-3-29 10:36:28
Jason Morwick,Robyn Bews,Tim Lormanesidues . (.) and . (.) was kinetically and comparatively analysed by fitting to Gaussian, Logistic and Weibull DAEMs. The three models offered reasonable and similar kinetic parameters. In addition, the kinetics analyses with . # 1 resulted in slightly better fit qualities and more reasonable kinetic parameters than . = 1.
Bravura
发表于 2025-3-29 12:58:18
Study on Soil Temperature Recovery Prediction Model of Ground Source Heat Pumps the key to formulate the operation strategy of a ground source heat pump system under intermittent operation or composite ground source heat pump systems. In this paper, based on the analogy idea of the thermal resistance–capacitance model, the heat balance network equations between buried pipe, b
Communicate
发表于 2025-3-29 18:41:43
A Comparative Study of the Transcritical CO2 Cycle and the Organic Rankine Cycles Using R245fa and Lconventional power units due to the low enthalpy. This study compares transcritical CO. (T-CO.) cycle and organic Rankine cycles (ORCs) in terms of heat recovery efficiency (.) and system efficiency (.), using 90 °C–150 °C (.) of hot water as the heat source. The analysis was conducted via MATLAB an
庇护
发表于 2025-3-29 21:25:44
Numerical Simulation of the Influence of Air Space Thickness in Heat Transfer of a High-Performancethe renovated building or the low-energy house for the purpose of improving thermal efficiency and energy preservation. The first model aims to examine the influence of the distance between two glazing (also defined as the air space thickness) in the heat flux by simulation using the COMSOL Multiph