钢笔记下惩罚
发表于 2025-3-25 03:49:44
http://reply.papertrans.cn/32/3113/311253/311253_21.png
血统
发表于 2025-3-25 08:21:08
http://reply.papertrans.cn/32/3113/311253/311253_22.png
Ancestor
发表于 2025-3-25 13:33:20
http://reply.papertrans.cn/32/3113/311253/311253_23.png
OMIT
发表于 2025-3-25 19:36:28
http://reply.papertrans.cn/32/3113/311253/311253_24.png
Nomadic
发表于 2025-3-25 20:37:16
TiOx/Cr2O3 Heating Coatings for Injection Molding of Polyamideperature distribution was investigated as well as thermal durability for processing polyamide in the temperature range from 70 °C to 220 °C. The coating system withstood 5,000 thermal cycles at high heating rates and without degradation.
obsolete
发表于 2025-3-26 02:15:08
http://reply.papertrans.cn/32/3113/311253/311253_26.png
ANA
发表于 2025-3-26 04:42:17
Melt Pool Formation and Out-of-Equilibrium Solidification During the Laser Metal Deposition Processrostructure analysis, we will unravel the solidification process during LMD. The dendrite arm spacing is compared with experimental data to prove the validity of the simulation..In this work, Inconel 718, a material common in LMD turbomachinery applications, is used.
Reclaim
发表于 2025-3-26 10:23:07
http://reply.papertrans.cn/32/3113/311253/311253_28.png
eczema
发表于 2025-3-26 13:07:22
New Opportunities for Brazing Research by , Experiments in a Large Chamber Scanning Electron Microscler metal with aluminum alloy EN AW-42100 base metal, the maximum holding time has been determined as 3.5 min at 450 ºC. The wetting point at this temperature is reached after one minute, which proves the effectiveness of the here investigated system.
ticlopidine
发表于 2025-3-26 20:35:46
http://reply.papertrans.cn/32/3113/311253/311253_30.png