乐器演奏者
发表于 2025-3-27 00:51:29
http://reply.papertrans.cn/32/3111/311072/311072_31.png
Figate
发表于 2025-3-27 02:49:25
http://reply.papertrans.cn/32/3111/311072/311072_32.png
Eclampsia
发表于 2025-3-27 08:16:43
Macmillan Motor Vehicle Engineering Serieshttp://image.papertrans.cn/e/image/311072.jpg
脊椎动物
发表于 2025-3-27 13:19:27
Textbook 1990Latest editionThis text addresses the subject of engines, particularly the reciprocating piston engine and its related systems. Systems which are discussed include cooling and heating, spark ignition, air supply and exhaust, compression ignition systems, vehicle electronics, starter motors and battery systems.
笨拙处理
发表于 2025-3-27 15:37:54
http://reply.papertrans.cn/32/3111/311072/311072_35.png
Senescent
发表于 2025-3-27 19:34:18
https://doi.org/10.1007/978-3-642-33603-4te. To improve cold start performance this system may have included into it a The second system may use one of many methods of allowing transistors to switch-off the primary current (this being the function of the contact breaker points in the first system).
大包裹
发表于 2025-3-27 23:53:04
http://reply.papertrans.cn/32/3111/311072/311072_37.png
OUTRE
发表于 2025-3-28 04:22:54
Spark-Ignition Systems,te. To improve cold start performance this system may have included into it a The second system may use one of many methods of allowing transistors to switch-off the primary current (this being the function of the contact breaker points in the first system).
检查
发表于 2025-3-28 08:36:58
Compression-Ignition Fuel Systems (2),uch as shown opposite. Larger CI engines may use a distributor type pump, but it is more likely that an in-line pump is used. These two designs of pump are the most popular types and are common on mass-produced vehicles. Some engine manufacturers produce their own fuel system design, examples being shown centre and right.
amnesia
发表于 2025-3-28 10:55:41
Spark-Ignition Systems,te. To improve cold start performance this system may have included into it a The second system may use one of many methods of allowing transistors to switch-off the primary current (this being the function of the contact breaker points in the first system).