deriver 发表于 2025-3-30 08:13:43
Influence of Width of Specimen on Tensile Properties of NiCo Thin Filmtester developed by authors was used to measure the mechanical characteristics of thin film materials. The tester has a load cell with maximum capacity of 0.5N and a non-contact position measuring system based on the principle of capacitance micrometry. The “dog-bone” type specimen was designed andyohimbine 发表于 2025-3-30 12:22:24
Dynamic Properties and Fatigue Failure of Aircraft Componenthanical systems dynamics at non-classic internal and external constraints. The method of the concentrated weights is convenient means of the analysis of dynamic properties of elastic mechanical systems. It has relative simplicity of definition of the parameters of equivalent discrete system, the cleAdherent 发表于 2025-3-30 18:43:31
Investigation of the Fatigue Behaviour of the Structural Magnesium Alloy AZ31-corroded specimens. The S-N curve of the parent material exhibits a very smooth transition from low to high cycle fatigue regime indicating a strong stress sensitivity. Crack initiation occurs already at early stage of the fatigue damage accumulation process. A transgranular initiation fracture is艺术 发表于 2025-3-30 21:27:22
Coulomb Failure Surfaces in Ductile Non Linear Elastic Materialsiple of Conservation of Energy — the total elastic strain energy density in this case. This Principle is equivalent to the path-independence of strain energy, the same not being true for its components, i.e. dilatational and distortional densities. This way, an intimate quantitative relationship isFlounder 发表于 2025-3-31 01:52:05
Effect of Stress on the Fire Reaction Properties of Polymer Composite Laminatesr under a heat flux of 75kW m.. It was found, for the first time, that stress has a small but significant effect on the fire reaction properties. Increasing tensile stress increased heat release rate and smoke production, while shortening the time-to-ignition. Compressive stress had the reverse effeRAFF 发表于 2025-3-31 05:24:15
http://reply.papertrans.cn/32/3107/310692/310692_56.png骚扰 发表于 2025-3-31 09:37:09
http://reply.papertrans.cn/32/3107/310692/310692_57.png杠杆 发表于 2025-3-31 14:48:13
http://reply.papertrans.cn/32/3107/310692/310692_58.png宪法没有 发表于 2025-3-31 17:36:37
http://reply.papertrans.cn/32/3107/310692/310692_59.pngPACK 发表于 2025-3-31 22:02:50
Fatigue Crack Growth Assessment of Corroded Aluminum Alloys model has been implemented and upgraded to account for the local material properties of the pre-corroded material ahead of the crack tip. In the model the local fracture behaviour at the crack tip of the corroded alloy is governed by the local fracture toughness of the material. The analytical resu