critic
发表于 2025-3-28 18:37:53
http://reply.papertrans.cn/32/3105/310444/310444_41.png
Sleep-Paralysis
发表于 2025-3-28 18:59:32
http://reply.papertrans.cn/32/3105/310444/310444_42.png
IVORY
发表于 2025-3-28 23:27:45
Life Cycle Assessments of Incineration Treatment for Sharp Medical Wastesed concerns relating to public health and occupational safety. Life cycle assessment (LCA) is a decision-supporting tool in waste management practice; but relatively little research has been done on the evaluation of sharp medical waste treatment from a life cycle perspective. Our study assesses th
轨道
发表于 2025-3-29 05:53:31
2367-1181 vel energy materials processing.Addresses the issues, compleThis collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems
pester
发表于 2025-3-29 08:53:17
Stochastic Modelling in Production Planning as well as the optimization of one of the fluid bed calciners and the installation of a combined heat and power generator (CHP) led AOS to where it is now—a leading alumina refinery with regard to the lowest energy consumption per ton of alumina.
heirloom
发表于 2025-3-29 12:10:29
http://reply.papertrans.cn/32/3105/310444/310444_46.png
adduction
发表于 2025-3-29 17:30:14
http://reply.papertrans.cn/32/3105/310444/310444_47.png
议程
发表于 2025-3-29 23:28:26
https://doi.org/10.1007/b138181cyclic gas exposure indicated hematite particles exhibited noticeable volume expansion in reduction and shrinkage in oxidation, corresponding to respective phase transformations. Materials surface changes during the redox gas cycles are discussed.
Entirety
发表于 2025-3-30 00:45:06
http://reply.papertrans.cn/32/3105/310444/310444_49.png
glucagon
发表于 2025-3-30 05:57:44
Leaching of Sb from TROF Furnace Doré Slagd on an industrial scale. The current study presents the preliminary results of the nitric acid and chloride leaching of antimony from Doré slag. Chemical and mineralogical analyses (SEM-EDS, AAS, XRD) were performed for the raw material, leaching residue, and leaching solution in order to ascertain the metal recovery and kinetics during leaching.