constellation
发表于 2025-3-26 23:41:17
http://reply.papertrans.cn/32/3105/310425/310425_31.png
CAGE
发表于 2025-3-27 01:08:46
Techniques for Reducing Toxicity After SBRT,r is shown to be inherently more efficient for transferring energy from the outer magnetic field to the liner. Finally, certain practical problems of liner formation and replacement in a fusion reactor vessel are briefly discussed.
荣幸
发表于 2025-3-27 05:48:04
Book 1976and attendees (and their supporting institutions, and companies), everyone of whom in his own measure helped to make the conference a success. The Editors further wish to thank the members of the Scientific Committee for the help they have given in organizing the conference and in editing, especiall
母猪
发表于 2025-3-27 11:15:55
http://reply.papertrans.cn/32/3105/310425/310425_34.png
懒洋洋
发表于 2025-3-27 14:34:07
http://reply.papertrans.cn/32/3105/310425/310425_35.png
patella
发表于 2025-3-27 20:37:29
http://reply.papertrans.cn/32/3105/310425/310425_36.png
Isometric
发表于 2025-3-28 00:53:01
Measurements of a Low Impedance, Large Area 100 kV Diode in the diode. A uniform line pinch is formed, 60 cm long by about 1 cm wide. Pinch current has been measured as a function of time. The average electron flow is at a very small angle to the tungsten anode. Tungsten is vaporized and melted on each pulse, but the quantity of material removed is much
斗志
发表于 2025-3-28 06:03:33
http://reply.papertrans.cn/32/3105/310425/310425_38.png
装勇敢地做
发表于 2025-3-28 10:02:05
High-Power Pulse Generation Using Exploding Fusesated and were found to be in general agreement with experiments. Voltages of more than 200 kV were generated in 50 nsec pulses and voltages in excess of 400 kV were generated in 25 nsec pulses. Of the foil materials tested, copper was found to give the best performance. This result is believed to be
极大痛苦
发表于 2025-3-28 12:45:38
Magnetically Driven Metal Liners for Plasma Compressionr is shown to be inherently more efficient for transferring energy from the outer magnetic field to the liner. Finally, certain practical problems of liner formation and replacement in a fusion reactor vessel are briefly discussed.