比喻好
发表于 2025-3-26 23:04:49
http://reply.papertrans.cn/32/3104/310332/310332_31.png
gastritis
发表于 2025-3-27 03:57:22
Numerical Approach for the Implementation of the Interaction of Pyrolysis Gases and Combustion ProduFD (Computational Fluid Dynamics) simulation to investigate the resource and energy efficiency of the aluminium recycling process in melting furnaces. During the melting process of aluminium scrap (e.g. used beverage cans) a reactive flow has got a major impact on the heat transfer to the load. Ther
itinerary
发表于 2025-3-27 08:37:06
Fluoropolymer Coated Condensing Heat Exchangers for Low-Grade Waste Heat Recovery-grade waste heat is abundant and its total work potential is huge. To effectively recover low-temperature waste heat, i.e. recover both the sensible and latent heats, the exhaust streams usually need to be cooled to temperatures below the water and acid dew points, which causes severe corrosion pro
debase
发表于 2025-3-27 10:50:54
Nitrate and Other Anion Removal from Waste Water Using the Hydroflex Technologyificant contamination in receiving waters. There is increased demand for new water technologies to meet new regulations and more exacting effluent standards. Standard chemical/physical water treatment technologies do little to aid in meeting effluent standards for nitrate and associated anions such
BAN
发表于 2025-3-27 15:02:29
Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnaceemperature. Based on a one-dimensional cold-state model, the similar geometry model, subarea method and basic force model were employed in this article to derive and accurately calculate the forces of gravity, gas pressure and friction. Combining a three-dimensional cold-state experiment of raceway
Between
发表于 2025-3-27 20:51:37
http://reply.papertrans.cn/32/3104/310332/310332_36.png
Accomplish
发表于 2025-3-28 00:54:41
Creep Strength and Oxidation Resistance of Industrially Made G115 Steel Pipend forgings of advanced ultra super critical (A-USC) fossil fired power plants used for the temperature scope from 600 to 650 °C. The successful development of G115 extends the upper application temperature limitation of martensitic steel from 600 °C to about 650 °C. This breakthrough is imperative
ectropion
发表于 2025-3-28 05:04:56
Accelerated Creep Test for New Steels and Weldsion of new steels for years. Same problem appears with creep tests on heat-affected zones in welded joints of these steels, as welding procedure influences their properties. And frequent power plant shut-downs due to adding solar/wind power to the net, call for creep-fatigue data which standard cree
Coordinate
发表于 2025-3-28 06:28:20
Anleitung zum Gebrauch des Buches,echnology, for example, CDQ (coke dry quenching), CCPP (combined cycle power plant), waste energy recovery from Linz-Donawitz process, etc. have been used widely and contributed a lot to the energy savings whose application status and energy recovery effect assessment were analyzed in this paper. Fu
Expostulate
发表于 2025-3-28 13:19:29
http://reply.papertrans.cn/32/3104/310332/310332_40.png