博识
发表于 2025-3-28 17:08:15
SEMAT and VENUS: Different Perspectives? concerning their performance are investigated: (1) heat transfer characteristics, (2) long-term behaviour. For relatively short, small-diameter thermosyphons subject to high radial evaporator heat fluxes film boiling is the dominant heat transfer limit. For various thermosyphons the heat transfer c
滔滔不绝的人
发表于 2025-3-28 19:42:15
http://reply.papertrans.cn/32/3103/310208/310208_42.png
军械库
发表于 2025-3-29 02:11:31
http://reply.papertrans.cn/32/3103/310208/310208_43.png
军械库
发表于 2025-3-29 04:50:09
Sociobiology and the Social Sciences,process employs mechanical vapour recompression techniques combined with the use of thin walled plastic tubes as a heat transfer surface. Laboratory investigations have been undertaken to determine the physical properties of the liquors involved, and data on viscosities, specific gravities, boiling
Vldl379
发表于 2025-3-29 08:27:24
http://reply.papertrans.cn/32/3103/310208/310208_45.png
Arthritis
发表于 2025-3-29 11:45:06
R. Felix Geyer,Johannes van der Zouwen information tends to be conflicting. An analysis of test results from BSC arc furnaces has been used to provide a typical pattern of waste heat rejection. This data provided a waste heat rejection of 200 kWh/tonne for a 170 tonne furnace. The waste heat boiler application is discussed in relation t
手工艺品
发表于 2025-3-29 18:41:52
https://doi.org/10.1007/978-1-4613-4095-9led at one of TEKSID (FIAT Group) foundries..The pilot plant operation aims to demonstrate the technical and economical possibility of an industrial plant that recovers and converts the latent and sensible heat of the cupola emissions into electric energy by a recovery system composed of thermal and
encomiast
发表于 2025-3-29 23:13:57
ecovery in industry. In this report the main objectives and the work programme are described..Some analytical investigations have preliminary results, such as our study about the potential of waste heat in industry usable by ORCS and the determination of the three most typical ORC-plants to be plann
Abominate
发表于 2025-3-30 02:10:09
Nabil Khattab,Sami Miaari,Haya Stierchievable with a standard steam turbine, while applying a substantial heat flow at an usable temperature..The following assumptions were made for the design point of the ORC engine:.The latter assumption is due to the requirement of utilizing the heat released at the condenser for space heating or o
尊重
发表于 2025-3-30 05:58:12
http://reply.papertrans.cn/32/3103/310208/310208_50.png