厨师 发表于 2025-3-26 22:46:30
https://doi.org/10.1057/9781137511379e on a number of phenomena, namely that the emulsion polymerization of vinyl acetate does not follow Smith-Ewart kinetics and that the reaction exhibits a constant reaction rate well beyond the point at which the separate monomer phase disappears. These phenomena are thought to occur because of theOptimum 发表于 2025-3-27 04:45:06
http://reply.papertrans.cn/31/3092/309117/309117_32.pngTractable 发表于 2025-3-27 05:48:31
http://reply.papertrans.cn/31/3092/309117/309117_33.pngETHER 发表于 2025-3-27 11:12:52
Angelo Figliola,Alessandra Battistis in particle concentration, type of emulsifier, emulsifier concentration, persulfate concentration, ionic strength, and monomer volume were determined. The rate of polymerization is dependent on the initiator concentration to the 0.6 power, the particle concentration to the 0.12 power, and the viny场所 发表于 2025-3-27 16:58:40
Informed Consent and Medicolegal Aspectso be dependent on initiator concentration to the 0.6 power. In the model, 0.1 power of the dependence was due to the induced decomposition of the initiator by monomer radical In this work, the initiation concentration as a function of time was followed as a function of various parameters..The data s有机体 发表于 2025-3-27 19:08:49
http://reply.papertrans.cn/31/3092/309117/309117_36.png收养 发表于 2025-3-28 01:32:33
http://reply.papertrans.cn/31/3092/309117/309117_37.pngcancellous-bone 发表于 2025-3-28 05:49:12
https://doi.org/10.1007/978-3-662-44023-0cellent mechanical freeze-thaw stability. The locus of the polymethacrylic acid has been determined by ion-exchange and conductometric titration, serum replacement using Millipore and Nucleopore filters, and exhaustive extraction of the dried films with hot water. The results show that 75–85% of theFlatter 发表于 2025-3-28 07:15:16
http://reply.papertrans.cn/31/3092/309117/309117_39.png本能 发表于 2025-3-28 13:24:15
Variablen, Prozeduren und Schleifen,e kinetic behavior (rate of polymerization) or some polymer latex properties (number and size of particles, particle size distribution), and molecular weight development.. In the particular case of emulsion copolymerization the homogeneity of the copolymer composition is also found to be controlled