内阁
发表于 2025-3-28 16:23:05
Investigation of Concrete Chimney Structure Using Edge Treatment Technique Based on CFD Static Strue an effective technique in reducing drag force, base shear, and deformation-induced on it. From the CFD results, we can conclude that the design profile of the chimney has a significant effect on the pressure exerted by air. The pressure exerted on the generic chimney (without edge treatment) has a
Transfusion
发表于 2025-3-28 20:43:42
http://reply.papertrans.cn/31/3086/308520/308520_42.png
Indent
发表于 2025-3-28 23:49:59
Performance and Emission Analysis on Four-Stroke Diesel Engine by the Use of Canola Oil with Differces the protecting capacity of the ozone layer. The main alternative solution to reduce these problems is biofuels. The biofuels will experience the increased green effects, with very low amount of the emissions. The temperature and the pressure variations will also be comparatively less in these bi
一小块
发表于 2025-3-29 05:43:06
http://reply.papertrans.cn/31/3086/308520/308520_44.png
glomeruli
发表于 2025-3-29 07:18:41
CFD-Based Performance Investigation of Convex Protrusion Shape Roughened Solar Air Heater,minimum value of THPP is found at ‘. = 12’, ‘. = 0.019’, ‘. = 1.6’ and ‘Re = 2532’ and the maximum value of THPP was found at ‘. = 12’, ‘. = 0.035’, ‘. = 1.6’ and ‘Re = 8700’. The pressure, velocity and turbulence kinetic energy and turbulent intensity contour have been plotted to see the clear view
Musket
发表于 2025-3-29 13:03:11
Oil Extraction from Microalgae, Its Performance and Emission Analyses in Diesel Engine using Differdry algae is obtained from 15 kg of green grown microalgae and 2 kg of dry microalgae powder is given 250 ml of crude algae oil. BTE is obtained as 32.11% for MBD0, 31.48% for MBD10, 30.83% for MBD15, 30.21% for MBD20, 29.47% for MBD25, 28.64% for MBD30 and 27.58% for MBD35 at maximum loading. Final
增减字母法
发表于 2025-3-29 16:33:53
Heat Transfer Studies with PCM as Thermal Interface Material,udy, PCM (paraffin wax) has been tested and compared with conventionally used thermal interface material, i.e., silicon grease, for a range of interface pressure and heating conditions. Eventually, thermal contact conductance and heat dissipation results for both thermal interface materials have bee
harbinger
发表于 2025-3-29 22:10:30
Three-Dimensional Computational Investigations of Wake Management in Finned Tube Arrays,nsible for the secondary flow structures. Apart from fins, the tubes too experience favorable changes. Higher heat transfer coefficients despite same Reynolds number, which make the heat exchanger compact, are a direct result of such flow alterations, thereby lowering the heat exchange module‘s unit
Comprise
发表于 2025-3-30 03:34:27
Recent Developments and Challenges in Solar Harvesting of Photovoltaic System: A Review,ons to build an effective, low-cost, and reliable PV system for maximum solar energy harvesting. The study revealed that the active dual-axes closed-loop control based on non-conventional control algorithms could be the best tracking method to maximize the PV system’s output.
perimenopause
发表于 2025-3-30 04:49:10
https://doi.org/10.1007/978-3-8348-8341-4mance and combustion characteristics also was studied along with preheated air. Initially, the test was conducted on single-cylinder diesel engine fueled with diesel. Further, experimentation was conducted for six test modes of engine fueled with Karanja biodiesel KBD20 which was prepared by transes