音乐学者
发表于 2025-3-25 04:11:06
G. Principi,S. Lo Russo,C. Tosellotion - noise which is coupled into the circuit as opposed to the intrinsic noise generated within the circuit elements. This type of noise is strongly linked to circuit layout and construction techniques rather than to the circuit design itself. It is often called interference and may be random or deterministic.
粗糙滥制
发表于 2025-3-25 10:27:10
http://reply.papertrans.cn/31/3064/306348/306348_22.png
achlorhydria
发表于 2025-3-25 12:46:13
https://doi.org/10.1007/978-3-319-61288-1g from the random movement of charge carriers, or it is an unwanted signal tending to obscure or interfere with a required signal. This second definition is broader and includes the random noise but it also includes interference — that is, the addition to the ‘required’ signal of other signals which
HAVOC
发表于 2025-3-25 18:35:58
http://reply.papertrans.cn/31/3064/306348/306348_24.png
instill
发表于 2025-3-25 21:49:32
G. Principi,S. Lo Russo,C. Tosellotion - noise which is coupled into the circuit as opposed to the intrinsic noise generated within the circuit elements. This type of noise is strongly linked to circuit layout and construction techniques rather than to the circuit design itself. It is often called interference and may be random or d
阴险
发表于 2025-3-26 03:28:30
http://reply.papertrans.cn/31/3064/306348/306348_26.png
漫不经心
发表于 2025-3-26 06:09:41
http://reply.papertrans.cn/31/3064/306348/306348_27.png
lipids
发表于 2025-3-26 11:40:35
Non-conventional machines and processes,ional reliability or error rate determined by these quantities. Failure to set noise or noise-detertnined limits, or to design to meet other specifications, leaving the ‘noise problem’ to be sorted out at the end, can lead to inelegant patching-up or expensive re-design. We are fortunate that, altho
confide
发表于 2025-3-26 13:14:21
Quality and inspection in assembly,In order to analyse the noise performance of circuits it is useful to represent real devices ‘ideal’ noiseless circuits, plus a minimum number of noise generators. In the following sections we develop the noise models of some common circuit elements.
无能力之人
发表于 2025-3-26 18:50:27
https://doi.org/10.1007/978-3-662-54740-3In order to make use of analysis and low noise design techniques, the circuit designer requires a knowledge of, and/or a means of measuring, the noise performance of circuit elements, circuits and complete systems in order to determine whether or not they meet specification.