Mri485 发表于 2025-3-28 16:42:01

http://reply.papertrans.cn/31/3061/306015/306015_41.png

Circumscribe 发表于 2025-3-28 22:09:17

Classical and Quantum Analysis of Phase-Insensitive Systems,e commutator brackets from input to output. The commutator brackets determine the minimum amount of noise added to the signal as it passes through the network. Hence one may determine the optimum noise measure achievable in a quantum circuit directly from these relations.

小虫 发表于 2025-3-29 01:35:14

Solitons and Long-Distance Fiber Communications,d the “linear” regime (self-phase modulation is not utilized, but since it is not entirely avoided, it is combatted by proper dispersion management along the fiber). The operation is called non-return-to-zero, or NRZ for short, as a description of the signal format: if two pulses are adjacent to eac

生来 发表于 2025-3-29 05:42:29

http://reply.papertrans.cn/31/3061/306015/306015_44.png

craven 发表于 2025-3-29 09:46:41

1439-2674 um non-demolition measurements. Rich appendices give additional information. The book is intended for graduate students and scientists in physics and engineering. Numerous problems and selected solutions will help readers to deepen their knowledge.978-3-642-08462-1978-3-662-04190-1Series ISSN 1439-2674

是剥皮 发表于 2025-3-29 14:52:45

Eigenschaften und Aufbau von Hartmetallen,d to the exterior via “ports of access” are analyzed. Their impedance matrix description is obtained and the reciprocity theorem is applied to the impedance matrix. This analysis is in preparation for the study of noise in multiports, which begins in Chap. 5. Finally, we look at resonators in a gene

柏树 发表于 2025-3-29 19:27:47

,Hartmetall als verschleißfester Werkstoff,the space between the mirrors. The modes in dielectric waveguides and the modes of optical resonators share many of the properties of microwave waveguides and resonators discussed in the preceding chapter.

合同 发表于 2025-3-29 21:29:36

http://reply.papertrans.cn/31/3061/306015/306015_48.png

临时抱佛脚 发表于 2025-3-30 01:51:27

https://doi.org/10.1007/978-3-663-01876-6e commutator brackets from input to output. The commutator brackets determine the minimum amount of noise added to the signal as it passes through the network. Hence one may determine the optimum noise measure achievable in a quantum circuit directly from these relations.

单独 发表于 2025-3-30 07:45:50

An Impromptu Survey of the Literature,d the “linear” regime (self-phase modulation is not utilized, but since it is not entirely avoided, it is combatted by proper dispersion management along the fiber). The operation is called non-return-to-zero, or NRZ for short, as a description of the signal format: if two pulses are adjacent to eac
页: 1 2 3 4 [5] 6
查看完整版本: Titlebook: Electromagnetic Noise and Quantum Optical Measurements; Hermann A. Haus Textbook 2000 Springer-Verlag Berlin Heidelberg 2000 Dispersion.HT