刺激 发表于 2025-3-25 05:21:48
Grundlagen der Mikroelektronik 1uirrel-cage induction motor in the field-oriented operating mode. The purpose of this simulation is to analyse the influence of eddy currents and rotor-yoke-unloading in dependence on the field oriented currents in the direct and quadrature axis.威胁你 发表于 2025-3-25 09:43:58
Grundlagen der Molekularen Medizin possible to generate relatively complex motor models very fast and reliable. Limitations of this technique and suggestions for improvements are discussed at the end. The technique has been developed in the framework of a BRITE/EURAM project aiming for 3D optimisation of different kinds of electrostatic micromotors.MURAL 发表于 2025-3-25 13:38:20
http://reply.papertrans.cn/31/3057/305693/305693_23.pngfaction 发表于 2025-3-25 17:39:23
http://reply.papertrans.cn/31/3057/305693/305693_24.png断言 发表于 2025-3-25 21:48:32
https://doi.org/10.1007/978-3-8349-7103-6bonded NdFeB magnet materials and drives the washing machine drum directly without the need for conventional gearing systems. The key stages in the design are highlighted and test results are presented.使显得不重要 发表于 2025-3-26 02:29:27
Ausgewählte Organisationskonzeptel heating systems (resistance or gas): direct heating up of pans without thermal inertia, electronic adjustable power control. Although the induction principle has been known many years ago, the design of such systems necessitates the study of the three parts of an induction system: resonant converter, inductor, and pan.incontinence 发表于 2025-3-26 05:20:11
Magnetic Field Analysis in Induction Motors in the Field-Oriented Modeuirrel-cage induction motor in the field-oriented operating mode. The purpose of this simulation is to analyse the influence of eddy currents and rotor-yoke-unloading in dependence on the field oriented currents in the direct and quadrature axis.是突袭 发表于 2025-3-26 12:22:26
Automated 3D Mesh Generation Suited for Optimisation possible to generate relatively complex motor models very fast and reliable. Limitations of this technique and suggestions for improvements are discussed at the end. The technique has been developed in the framework of a BRITE/EURAM project aiming for 3D optimisation of different kinds of electrostatic micromotors.Lasting 发表于 2025-3-26 14:31:37
http://reply.papertrans.cn/31/3057/305693/305693_29.pngguzzle 发表于 2025-3-26 17:06:54
Flux-Weakening Operation of Permanent Magnet Synchronous Motors for Electric Vehicle Applicationhe requirements for a large power to weight ratio combined with an extended torque/speed characteristic and a high efficiency is a considerable challenge for the motor designer. This paper is concerned with the design and the comparison of two PMSM and the test results have been built for the adequate variant.