摆动
发表于 2025-3-23 09:46:34
http://reply.papertrans.cn/31/3005/300462/300462_11.png
fibroblast
发表于 2025-3-23 14:28:34
http://reply.papertrans.cn/31/3005/300462/300462_12.png
GROSS
发表于 2025-3-23 20:18:19
Liquid Metal Modelling of Flow Phenomena in the Continuous Casting Process of Steel of the liquid metal using flow measurements by UDV and surface profile measurement by a laser scanner, respectively. Strong fluctuations and deviations of the free surface were observed in case of a static magnetic field.
摘要
发表于 2025-3-24 01:28:13
Behaviors and Evolutions of MgO·Al2O 3 in Non-Oriented Silicon Steel During Calcium Treatmentbesides a common decrease in the product layer of CaO·MgO Al.O.. Then the evolution mechanisms of MgO·Al.O. inclusions were proposed in present work. Thus, Al/Mg atom ratio had a significant influence on the modification of MgO·Al.O. spinel.
inflate
发表于 2025-3-24 03:57:42
Evaluation of Joint Performance on High Nitrogen Stainless Steel Which is Expected to Have Higher Althis study, we bonded high nitrogen stainless steel by stud welding process, which is able to bond at short time, and we evaluate joint performance. We have got some interesting results from the other tests and examinations.
CRAFT
发表于 2025-3-24 07:40:59
Solidification and Evaluation of Thermal Parameters of Sn-Zn Eutectic Alloys Horizontally Solidifiedom macrostructures obtained were determined. The presence of defects in the solidified samples was analyzed, observing that they occur largely in the collision zones of solidification fronts advancing in opposite directions in the samples.
愤愤不平
发表于 2025-3-24 11:13:51
Charaktertabellen von Punktgruppenand the critical blowing rate (CBR) was deduced. In the real process, it is suggested that the bottom blowing rate is from 40 L/min to 180L/min when the interface tension is 0.12~1.2 N/m during the soft argon blowing.
Maximize
发表于 2025-3-24 16:18:12
https://doi.org/10.1007/978-3-662-66426-1eously. It is found that the low-temperature toughness and ductility of the steels are significantly the matrix microstructure during enhancing the strength by introducing the nano-scale precipitates. The effects of alloying elements on the microstructure evolution and nano-scale precipitation are also discussed.
向前变椭圆
发表于 2025-3-24 22:10:57
,Vielleicht zunächst wirklich nur,s are systematically analyzed. In addition, the generation of porous surface structures in Ti target is regarded as the result of phase explosion in the molten surface layer of targets and the thermodynamic condition in our experiment for phase explosion is evaluated.
痛得哭了
发表于 2025-3-25 02:45:47
WebSphere 4 and 5 Component Architectures, 19.2% to 5.4% and the bulk density increased from 2.78g/cm. to 3.15g/cm. after firing at 1600°C for 2h by the addition of 4% MnO. In addition, a texture microstructure was observed, which is considered to be favorable to improve mechanical properties and the service life of Al.O.-MgO-CaO system refractories.