去世
发表于 2025-3-25 04:25:05
Walter D‘Ambrogio,Dan Roettgen,Maarten van der Sei
foppish
发表于 2025-3-25 07:58:59
https://doi.org/10.1007/978-3-031-68897-3Conference Proceedings; dynamic substructures; structural engineering; structural dynamics; hybrid subst
capsule
发表于 2025-3-25 15:17:22
http://reply.papertrans.cn/29/2849/284847/284847_23.png
公猪
发表于 2025-3-25 16:36:50
Dynamic Substructures, Vol. 4 978-3-031-68897-3Series ISSN 2191-5644 Series E-ISSN 2191-5652
FOIL
发表于 2025-3-25 23:56:37
https://doi.org/10.1007/978-3-642-97122-8mark structure for experimental-numerical substructuring exercises. Some years ago, representatives from several research institutes formed a group that defined several desirable properties for the new benchmark structure. The outcome is a frame structure together with different plates. Together, th
哄骗
发表于 2025-3-26 00:17:22
https://doi.org/10.1007/978-3-642-58155-7vironment. Furthermore, collecting service environment data requires a modified flight structure which accommodates telemetry equipment. Due to the different mechanical impedances of the shaker table and payload, the test structure experiences different loads in the test environment which can lead t
moratorium
发表于 2025-3-26 05:39:18
https://doi.org/10.1007/978-3-7091-5362-8ing negatively impacts the predictive capability of the transfer path analysis (TPA) model, especially in component-based TPA. Sparse inverse solutions have recently been shown as a potential method for mitigating these overfitting errors when traditional methods (i.e., Tikhonov regularization and s
万神殿
发表于 2025-3-26 12:19:38
http://reply.papertrans.cn/29/2849/284847/284847_28.png
Pituitary-Gland
发表于 2025-3-26 14:39:44
https://doi.org/10.1007/978-3-662-41856-7a combination of these. In order to create accurate, predictive models of rotor systems, the stiffness and damping or the dynamics of these connections must be known in advance..Substructuring techniques provide methods for the identification of linear joints. Linear joint identification techniques
微枝末节
发表于 2025-3-26 20:52:23
https://doi.org/10.1007/978-3-662-13458-0e to high vibration amplitudes. Even in numerical simulations, they are difficult to detect, and commonly path following strategies are used to determine a bifurcation point on the isolated branch. The majority of numerical investigations assume steady state conditions, and modifications in the syst