载货清单
发表于 2025-3-23 12:16:53
http://reply.papertrans.cn/29/2846/284582/284582_11.png
Pelvic-Floor
发表于 2025-3-23 17:54:56
High-Temperature Mechanical Properties of Ceramic-Matrix Composites, interlaminar shear strength, in-plane shear strength, flexural strength, cyclic fatigue lifetime, and creep life are obtained from experimental data. The high-temperature mechanical properties can support the engineers to better design CMCs hot-section components.
慢跑鞋
发表于 2025-3-23 19:24:00
http://reply.papertrans.cn/29/2846/284582/284582_13.png
LOPE
发表于 2025-3-24 01:34:59
http://reply.papertrans.cn/29/2846/284582/284582_14.png
Accessible
发表于 2025-3-24 03:46:16
2662-9305 aeroengines were also introduced. The book can better help the engineering designers understand the methods used in design and testing of CMC components.978-981-97-6111-1978-981-97-6109-8Series ISSN 2662-9305 Series E-ISSN 2662-9313
多嘴
发表于 2025-3-24 08:24:46
Family Therapy: In and Out of SYNCwere conducted to investigate the damage mechanisms and failure modes. During thermal shock tests, the surface temperature field of the SiC/SiC guide vane was analyzed. The damage characteristics of the single/twin turbine guide vane after experiencing different thermal shocks were discussed.
antenna
发表于 2025-3-24 10:45:28
Design, Fabrication and Testing of CMC High-Pressure Turbine Guide Vane,were conducted to investigate the damage mechanisms and failure modes. During thermal shock tests, the surface temperature field of the SiC/SiC guide vane was analyzed. The damage characteristics of the single/twin turbine guide vane after experiencing different thermal shocks were discussed.
amyloid
发表于 2025-3-24 14:50:14
Book 2024gines. The book focuses on the design, fabrication and testing of different CMC components, e.g., turbine guide vanes, combustor liner, and turbine blisk, etc. The high-temperature mechanical properties, and performance requirements of the aeroengines were also introduced. The book can better help t
narcissism
发表于 2025-3-24 22:15:58
http://reply.papertrans.cn/29/2846/284582/284582_19.png
grounded
发表于 2025-3-25 01:49:59
forms, i.e., three-dimensional four-directional (3D4D) braided, two-dimensional plain-woven (2DPW) and stain woven (2DSW) lamination, are investigated at elevated temperature of 1400 °C. The high-temperature mechanical properties of SiC/SiC composites, e.g., tensile strength, compressional strength,