bioavailability
发表于 2025-3-30 09:53:47
http://reply.papertrans.cn/29/2842/284178/284178_51.png
不足的东西
发表于 2025-3-30 15:52:05
http://reply.papertrans.cn/29/2842/284178/284178_52.png
上下倒置
发表于 2025-3-30 18:18:20
Conference proceedings 2022elling of Geotechnical Problems. The book is useful for the academicians and working professionals with coverage of both theoretical and practical aspects of Dynamics of Soil and Modelling studies on Geotechnical problems based on research findings and site specific inputs. The book serves as a usef
burnish
发表于 2025-3-30 22:34:10
University Vacations—Vacances Universitairesare. Bamboo mats with a rectangular pattern with a thickness of 0.5 mm were used. Improvement in bearing capacity and reduction in the settlement were analysed using the software, and it was observed that the bearing strength of sand beds increased as the number of reinforcing layers increased.
Arthritis
发表于 2025-3-31 02:40:57
http://reply.papertrans.cn/29/2842/284178/284178_55.png
muscle-fibers
发表于 2025-3-31 07:05:50
Dynamics of Soil and Modelling of Geotechnical ProblemsProceedings of India
placebo-effect
发表于 2025-3-31 09:10:57
Forensic Analysis of Retaining Wall Failure,nt calculations of the wall which showed distress in the form of translation and vertical settlements are presented. Further, back analysis of gravity retaining wall is performed using conventional methods and FEM software PLAXIS 3D. Back analysis of failure showed that the mechanism of failure is p
malign
发表于 2025-3-31 14:10:21
Development of Equivalent Lattice Beam Model for Support System in Tunnels and Caverns Using FEM Anmployed in tunnels and caverns. The equivalent stiffness of lattice beam rectangular in shape was determined by four continuum modeling techniques, namely, an equivalent moment of area based on simply supported condition or fixed end condition, method of parallel axis theorem, Burgardt and Cartraud’
流浪者
发表于 2025-3-31 19:06:01
Earth Pressures of Soils Partially Replaced with Building Derived Materials for Narrow Backfill Conhe failure surfaces are limited by the width of narrow backfills. Large scale tests are generally expensive and needs added labor cost that makes it difficult to carry out a wide range of parametric studies. In this regard, numerical analysis serves as a cost-effective measure that helps in better u
hurricane
发表于 2025-3-31 23:08:48
http://reply.papertrans.cn/29/2842/284178/284178_60.png