不来
发表于 2025-3-26 21:54:35
http://reply.papertrans.cn/29/2840/283974/283974_31.png
渗入
发表于 2025-3-27 03:01:00
http://reply.papertrans.cn/29/2840/283974/283974_32.png
消极词汇
发表于 2025-3-27 06:31:02
http://reply.papertrans.cn/29/2840/283974/283974_33.png
甜瓜
发表于 2025-3-27 11:01:16
Cam Analysis,the disc cam’s profile. We start by defining the linear motion of the knife-edge follower attached to the plate (or disc cam). Equation (.) defines the angular velocity of the cam in revolutions per the total time, T, it takes to make one revolution of the cam.
modest
发表于 2025-3-27 14:53:06
http://reply.papertrans.cn/29/2840/283974/283974_35.png
ADAGE
发表于 2025-3-27 21:25:23
http://reply.papertrans.cn/29/2840/283974/283974_36.png
强行引入
发表于 2025-3-27 22:00:44
http://reply.papertrans.cn/29/2840/283974/283974_37.png
向下五度才偏
发表于 2025-3-28 03:54:24
Basic Computer Modeling of Mechanisms,s section focuses on developing simple computer models for solving a 2 . 2 linear equation and 3 . 3 linear equation using Cramer’s rule. In addition, the code to generate plots for topics discussed in Chaps. . and . is given. We start with the 2 . 2 matrix and code generated using MATLAB®.
蔓藤图饰
发表于 2025-3-28 09:07:22
Other Mechanisms,pm) and torque, T (in-lbs). Equation (.) defines the tangential force, ., (pounds) in terms of diameter, d (inches). Finally, Eq. (.) gives an alternate equation for HP in terms of velocity, v (ft/min). These equations are used extensively to calculate the forces and torques imparted by gears, belts, and roller chains onto shafts.
高贵领导
发表于 2025-3-28 13:26:55
http://reply.papertrans.cn/29/2840/283974/283974_40.png