慢慢冲刷
发表于 2025-3-28 16:33:42
2191-5644 fourth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of the Dynamics of Coupled Structures, including papers on:.. ..Real-Time/Hybrid Subs
正式演说
发表于 2025-3-28 20:31:25
http://reply.papertrans.cn/29/2838/283778/283778_42.png
迫击炮
发表于 2025-3-29 02:13:20
A Genetic Algorithm-Based Optimization Approach for Fixture Design that Preserves Desired Dynamic Re boundary conditions of a connecting component is proposed. It is assumed that the response of the connecting component is known, and the goal of the process is to design a fixture that replicates that response, without specific knowledge about the original component’s geometric dimensions or mater
分开如此和谐
发表于 2025-3-29 07:06:15
Characterization of Rubber Mounts Through Virtual Point Transformation Using Different Boundary Conal bracket to account for the current bushing’s architecture. In this procedure, the dynamic properties are determined from triaxial accelerometers measurements with impact hammer excitation. The output results in terms of dynamic stiffness will be compared with dedicated measurements conducted on a
ablate
发表于 2025-3-29 08:55:41
http://reply.papertrans.cn/29/2838/283778/283778_45.png
椭圆
发表于 2025-3-29 12:07:25
http://reply.papertrans.cn/29/2838/283778/283778_46.png
fallible
发表于 2025-3-29 16:57:20
Real-Time Hybrid Substructuring Using an Inertial Shaker Transfer System,ypical RTHS configuration, a transfer system is used to impart numerically determined displacements onto the physical substructure, and force sensors are used to measure the resulting restoring forces. The measurements are feed back into the numerical model to determine the displacement response at
裹住
发表于 2025-3-29 23:14:43
http://reply.papertrans.cn/29/2838/283778/283778_48.png
刺耳
发表于 2025-3-30 01:13:21
http://reply.papertrans.cn/29/2838/283778/283778_49.png
不整齐
发表于 2025-3-30 07:02:13
Isolation and Expansion of Gyroscopic Effects Using Frequency-Based Substructuring, enough. Also, another method that divides the dynamic stiffness into symmetric and skew-symmetric parts is presented, which only needs FRFs at one rotational speed. It gives slightly worse results than the FBS method in the current implementation.