Antecedent
发表于 2025-3-23 12:38:03
A Proposal of Dynamic Behaviour Design Based on Mode Shape Tracing: Numerical Application to a Moto to be modified in order to improve assembly performance..The method is applied to a whole motorbike frame, a multibody system with comparable components stiffnesses. Numerical modal analysis is performed on the full assembly with connections, front and rear sub-assemblies and on single components:
FLUSH
发表于 2025-3-23 14:17:59
Rapid Seismic Risk Assessment of Structures with Gaussian Process Regression,t is shown that Gaussian Process Regression (GPR), can provide an integrated model prediction for a group of structures with high accuracy and low uncertainties. This way, not only the predictions are made by a single model for different types of structures, but also the number of observations is ve
Chandelier
发表于 2025-3-23 19:12:26
http://reply.papertrans.cn/29/2838/283776/283776_13.png
荒唐
发表于 2025-3-23 22:22:38
http://reply.papertrans.cn/29/2838/283776/283776_14.png
让你明白
发表于 2025-3-24 06:08:42
http://reply.papertrans.cn/29/2838/283776/283776_15.png
取之不竭
发表于 2025-3-24 09:16:29
Jürgen E. Wittmann,Eike Gertdenkenstructuring to create a test-based model of a shaker table with a dynamically complex shaker fixture. The transmission simulator method is used with an experimentally derived modal model of the shaker and a fixture to decouple a finite element model of the fixture and replace it with a finite elemen
seroma
发表于 2025-3-24 10:48:51
http://reply.papertrans.cn/29/2838/283776/283776_17.png
CAJ
发表于 2025-3-24 15:35:29
Anne Grethe Pedersen,Martin Nielsen workpiece can be predicted. This FRF can then be utilized for predicting process stability..In the proposed method, the dynamic behavior of the workpiece is simulated using a discretized model and that of the table is measured experimentally. The accurate measurement of the experimental model of th
STALE
发表于 2025-3-24 21:13:16
Kindheit im Verhältnis der Generationensts are performed directly on as-manufactured pipe segments. The simulation results are compared with the experimental data for tensile and internal pressurization (burst) tests and a good agreement is observed.
COLON
发表于 2025-3-25 03:08:07
Anne Grethe Pedersen,Martin Nielsenal hammer which is presented here. The whole device is positioned in front of the structure with a stand, so there is no need for readjustment in order to perform multiple impacts on the structure. The energy of the impacts can be adjusted by tuning the parameter settings of the automatic hammer..Th