得罪人
发表于 2025-3-26 22:34:21
Die kontinuierliche Wavelet-Transformation,acture behaviour is then examined. The microstructure is characterised through optical microscopy and TEM, which shows the formation of ultrafine-grained (UFG) structure in cryo-cross rolled (CCR) samples. Reduction in grain size of CCR samples leads to improvement in tensile properties as a direct
infringe
发表于 2025-3-27 05:02:03
,Partialdruckmessgeräte und Leckdetektoren,e surface modification, which improves the adhesion between fiber and matrix in turn greatly enhances the tensile strength. In the present study, tensile strength attributes of alkali-treated jute fiber-reinforced polyester composites of 3-mm and 5-mm thickness were discussed. Here, the NaOH concent
债务
发表于 2025-3-27 05:31:41
Molekular- und Turbomolekularpumpen,trix is reinforced with slender glass fibers at low volume fractions and used to prepare the laminates. The specimens machined from unreinforced (UR) and slender filler-reinforced (SFR) laminates are subjected to 5 J and 12.5 J impact energies. While at lower energy, the influence of short fiber rei
Aggrandize
发表于 2025-3-27 10:52:46
http://reply.papertrans.cn/29/2836/283539/283539_34.png
食草
发表于 2025-3-27 13:49:03
Einleitung: Bedeutungen erfahrend to variety of mechanical, thermal, electrical and other kinds of loads. The fundamental and consistent approach followed in defining and in evolving this “thermodynamic state index” enables reliable estimation of material damage, even when multiple competing damage mechanisms are involved. In this
顶点
发表于 2025-3-27 18:50:49
Einleitung: Bedeutungen erfahrenat importance to the research community. Therefore, the objective of the current investigation is to study the impact of porosity and temperature loads on the buckling characteristics of FGM plates. The effective material properties of porous FGM plates are found using modified power law distributio
LASH
发表于 2025-3-28 01:36:51
http://reply.papertrans.cn/29/2836/283539/283539_37.png
Deject
发表于 2025-3-28 04:37:58
https://doi.org/10.1007/978-3-322-97047-3er, structural mechanics, and electromagnetics. It can find the heat flow rates, heat flux, and temperature distribution over the surfaces by modeling conduction-dominant heat transfer problems. Here, this chapter has solved the previous research problems of two-dimensional transient heat conduction
theta-waves
发表于 2025-3-28 09:20:09
Einleitung: Bedeutungen erfahren disc leads to strains, whilst the heat generated due to friction results in thermal stresses. The problems dealing with the numerical analysis and the strength prediction of the brake disc are generally a complex problem that involves coupled structural and thermal analysis. The application of comp
abysmal
发表于 2025-3-28 13:05:29
http://reply.papertrans.cn/29/2836/283539/283539_40.png