Type-1-Diabetes
发表于 2025-3-25 06:20:23
http://reply.papertrans.cn/29/2836/283530/283530_21.png
Asseverate
发表于 2025-3-25 08:10:51
http://reply.papertrans.cn/29/2836/283530/283530_22.png
财产
发表于 2025-3-25 15:33:11
L,or performing high strain rate tests on metals in a combined tension-torsion state..Analogously to the classic split Hopkinson bar technique, the system configuration consists of three bars: a pre-stressed bar, an input bar, and an output bar; the measurement is also based on the classical three-wav
啜泣
发表于 2025-3-25 17:12:14
LL,ring stress. The problem addressed in this paper is how to determine the Poncelet bearing stress from a conventional cone-penetrometer test (CPT). For the case of a particular saturated sandy clay, it is shown that strength has an exponential dependence on strain rate, determined from unconfined com
expository
发表于 2025-3-25 23:40:31
http://reply.papertrans.cn/29/2836/283530/283530_25.png
FOLD
发表于 2025-3-26 01:50:42
http://reply.papertrans.cn/29/2836/283530/283530_26.png
百科全书
发表于 2025-3-26 06:10:17
M,s. Conical nose projectiles having various apex angles were launched into sand targets at an impact velocity of approximately 200 m/s. A vertical firing range was designed and calibrated for launching projectiles with a diameter of 14.3 mm. Aluminum rod projectiles with conical nose apex angles rang
圣人
发表于 2025-3-26 09:41:44
N,oading experiments. Finite-element modelling was implemented to optimise the design and achieve appropriate deformation and failure in both tensile and torsional loading conditions. The capability of the proposed specimen configuration is demonstrated via an experimental campaign on commercially pur
confederacy
发表于 2025-3-26 15:33:46
http://reply.papertrans.cn/29/2836/283530/283530_29.png
alliance
发表于 2025-3-26 17:54:12
http://reply.papertrans.cn/29/2836/283530/283530_30.png