BANAL
发表于 2025-3-23 11:02:07
Xinye Shao,Mingchuan Yang,Qing Guoproperties. However, machining of glass is still a major problem for the manufacturing industry since it is very brittle and high hardness. In this chapter, grooving and cutting tests of soda-lime glass are conducted to evaluate its cutting performance using an ultra-precision lathe with a single cr
Haphazard
发表于 2025-3-23 15:32:38
Hangxu Su,Lvming Lv,Xufen Xie,Miao Miaochining centre with CBN tools. The cutting forces are measured using a three-component dynamometer. Machined workpiece surface topography, chip formation, and tool wear are examined using an OMIS and SEM. Tool flank wear . is also measured using the OMIS. Surface roughness is measured using a stylus
男学院
发表于 2025-3-23 18:10:32
http://reply.papertrans.cn/29/2834/283354/283354_13.png
Incumbent
发表于 2025-3-24 01:35:48
Mohsin Hafeez,Usman Khalid Awanesses. For machining of brittle material, UVC has also been proven useful in improving surface integrity and increasing tool life by significantly increasing critical undeformed chip thickness for ductile-to-brittle transition. This chapter presents an analytical model to predict critical undeformed
大厅
发表于 2025-3-24 05:27:18
Managing Pakistan’s Groundwater amplitude, diamond type, cutting speed, feed rate and depth of cut, on ductile mode cutting of tungsten carbide such as critical depth of cut, cutting force, chip formation, tool wear and surface integrity. Cutting forces are measured using a three-component dynamometer, critical depth of cut is me
overwrought
发表于 2025-3-24 10:31:03
http://reply.papertrans.cn/29/2834/283354/283354_16.png
Defiance
发表于 2025-3-24 12:27:38
http://reply.papertrans.cn/29/2834/283354/283354_17.png
appall
发表于 2025-3-24 18:34:49
http://reply.papertrans.cn/29/2834/283354/283354_18.png
尾巴
发表于 2025-3-24 21:04:05
Ductile Mode Cutting of Brittle Materials978-981-32-9836-1Series ISSN 1860-5168 Series E-ISSN 2196-1735
Orgasm
发表于 2025-3-25 00:40:17
http://reply.papertrans.cn/29/2834/283354/283354_20.png