下船
发表于 2025-3-30 11:16:35
Modelling Continuous Convection Dryers for Particulate Solids — Progress and Problemsatter is divided into feedstock characteristics and equipment characteristics. Our present ability to formulate reliable feedstock models and equipment models for fluid bed dryers, pneumatic conveying dryers, rotary dryers and spray dryers is then assessed.
Affable
发表于 2025-3-30 14:04:25
The Mathematical Modelling of Drying Process Based on Moisture Transfer Mechanism The model exposes the phenomenon of receding of the evaporation zone into the dried body, and takes into account the dried body shrinkage..The presented model as well as Krischer’s and Berger and Pei’s models have been solved numerically and the solutions have been compared with experimental results.
Alveolar-Bone
发表于 2025-3-30 20:24:40
Another Attempt to Answer Our Questionhips. Drying can be modeled utilizing fundamental phenomena, in contrast to most of the previous work in which these phenomena were used to explain empirical relationships..New instruments and techniques provide an opportunity for advancing the knowledge of fundamental research in drying. The comput
法律的瑕疵
发表于 2025-3-30 23:34:15
http://reply.papertrans.cn/29/2833/283268/283268_54.png
法官
发表于 2025-3-31 04:32:36
http://reply.papertrans.cn/29/2833/283268/283268_55.png
amputation
发表于 2025-3-31 06:23:54
Another Attempt to Answer Our Questionconsider the viewpoints of energy economy..In the course of these considerations the renewable energy sources came into the focus of interest and the possibilities in solar energy have also been rediscovered..Setting out from the incontestable advantages of solar energy there was an enthusiastic ups
不利
发表于 2025-3-31 12:57:29
Another Attempt to Answer Our Questiones and disadvantages of such drying are discussed. Knowledge of equilibrium moisture content and drying rates is necessary when designing equipment for drying in superheated vapour, and some aspects of these are presented. A short discussion on large scale application of steam drying is included.
创作
发表于 2025-3-31 14:27:27
http://reply.papertrans.cn/29/2833/283268/283268_58.png
LATER
发表于 2025-3-31 18:40:47
Another Attempt to Answer Our Questionatter is divided into feedstock characteristics and equipment characteristics. Our present ability to formulate reliable feedstock models and equipment models for fluid bed dryers, pneumatic conveying dryers, rotary dryers and spray dryers is then assessed.
APO
发表于 2025-3-31 23:01:16
Another Attempt to Answer Our Questionrate curves can be predicted from physical properties alone provided that the actual contact time of the material at the hot surface is known. For mechanically agitated particulate material the actual contact time has been correlated to the time scale of the agitator by the “penetration model”. Only