genesis
发表于 2025-3-26 23:53:28
Effects of the method of identification of the diffusion coefficient on accuracy of modeling bound lem, an improved algorithm for the bound-constrained optimization as well as an alternative submodel for the diffusion coefficient’s dependency on the bound water content. Identification of the diffusion coefficient for Scots pine wood (. L.) using the proposed inverse approach is presented. The acc
后来
发表于 2025-3-27 01:21:02
http://reply.papertrans.cn/29/2833/283267/283267_32.png
Hyaluronic-Acid
发表于 2025-3-27 08:38:55
http://reply.papertrans.cn/29/2833/283267/283267_33.png
Default
发表于 2025-3-27 11:55:36
http://reply.papertrans.cn/29/2833/283267/283267_34.png
CBC471
发表于 2025-3-27 16:56:15
Optimization of fine solid drying in bubble fluidized bed,ine solids. A drying process proceeding in a three-stage cascade of fluidized cross-current dryers was considered. Solid flows from stage to stage, and fresh gas is introduced to each stage of the cascade. The hydrodynamics of bubble fluidized bed and kinetics of heat and mass transfer are taken int
RUPT
发表于 2025-3-27 17:49:47
Merle Baake,Josef Ingenerf,Björn Andersenxperimental tests, the local and global distributions of velocity, temperature, drying air humidity and moisture content of material dried in the drying tower were determined. Analysis of the results showed that the process of agglomeration during counter-current spray drying depended mainly on air temperature in the atomization zone.
coalition
发表于 2025-3-28 01:30:12
http://reply.papertrans.cn/29/2833/283267/283267_37.png
aristocracy
发表于 2025-3-28 03:14:17
https://doi.org/10.1007/978-3-030-48717-1XI Polish Drying Symposium, held in Poznań, a historic and beautiful city in Western Poland, on September 13–16, 2005. The Symposium, organized jointly by the Drying Section of the Committee of Chemical and Process Engineering of the Polish Academy of Sciences, the Polish Drying Association, Poznań
TEM
发表于 2025-3-28 08:24:45
http://reply.papertrans.cn/29/2833/283267/283267_39.png
白杨
发表于 2025-3-28 12:04:21
https://doi.org/10.1007/978-3-030-48717-1als are discussed: nanoparticles, nanolayers (nanofilms), and nanoporous materials. Principally the method of spray drying using ultrasonic nebulizers and electrospraying is presented for the first group. The Langmuir-Blogget technique is presented for the second group. The method of supercritical d