骑师
发表于 2025-3-26 23:24:56
Cost Effective and Energy Efficient Control of Indoor Humidity in Buildings with Hygroscopic BuildiThe results of the simulations and experiments show that these devices and methods have the potential to improve thermal comfort and indoor air quality (IAQ), while reducing the energy consumption of the buildings.
endure
发表于 2025-3-27 02:02:30
Risk of Condensation in Mechanically Attached Roof Systems in Cold U.S. Climate Zones,art today and can help to study different effects. Variations of several input parameter, such as short-wave absorptivity of the solar radiation, ventilation underneath the membrane with interior or exterior air, specific climate data, etc., show their influences on the moisture accumulation underne
极端的正确性
发表于 2025-3-27 06:07:23
https://doi.org/10.1007/978-3-319-04531-3Building Materials and Components; Capillary Rise; Drying Kinetics; Heat and Mass Transfer; Modelling; Mo
最高点
发表于 2025-3-27 10:11:08
978-3-319-35748-5Springer International Publishing Switzerland 2014
frenzy
发表于 2025-3-27 13:37:20
http://reply.papertrans.cn/29/2833/283265/283265_35.png
群居男女
发表于 2025-3-27 19:44:05
http://reply.papertrans.cn/29/2833/283265/283265_36.png
arabesque
发表于 2025-3-27 23:21:20
Building Pathology and Rehabilitationhttp://image.papertrans.cn/e/image/283265.jpg
沉思的鱼
发表于 2025-3-28 02:34:39
http://reply.papertrans.cn/29/2833/283265/283265_38.png
后天习得
发表于 2025-3-28 08:23:13
Christine Mayer,Adelina Arredondolding and the environment. First order mathematical models can describe satisfactory phenomena like capillary rise and drying kinetics. Their advantages lie on the fact that they are general and include parameters with physical meaning. These parameters quantify the environment effect (temperature,
歪曲道理
发表于 2025-3-28 11:08:46
Christine Mayer,Adelina Arredondod environment, which is determined by the drying and wetting rate of masonry. So, the moisture content is not only determined by the water that is absorbed by the material, but also by the amount of water that is evaporated under favourable conditions, which is described by the drying process. This