起皱纹
发表于 2025-3-26 21:13:36
http://reply.papertrans.cn/29/2811/281094/281094_31.png
小步走路
发表于 2025-3-27 01:12:16
Introduction,t to the properties of transported materials. The key input parameter of such systems is the knowledge of mechanical and physical properties of transported bulk materials. Based on measurements and determination of such properties, we can calibrate and verify the behavior of such materials using com
牛马之尿
发表于 2025-3-27 08:00:31
http://reply.papertrans.cn/29/2811/281094/281094_33.png
不可思议
发表于 2025-3-27 10:26:20
Bucket Elevator Filling and Discharge,osts, power consumption, wear, and noise. This calls for the design of transport equipment using innovative approaches in the field to limit all possible losses during the conveyor operation. The loss may be significantly reduced through the choice of right parameters from the very start of the deve
brassy
发表于 2025-3-27 17:34:41
http://reply.papertrans.cn/29/2811/281094/281094_35.png
思想上升
发表于 2025-3-27 18:25:38
,The Results for the Optimization of Bucket Filling and Discharge,sport speed is the best way to improve the operation of the bucket elevator. For this reason, most conveyors nowadays are equipped with a frequency converter. However, characteristics of optimum settings of elevator speed are still missing. Although the characteristics differ in various designs of b
粘
发表于 2025-3-27 23:09:53
http://reply.papertrans.cn/29/2811/281094/281094_37.png
legislate
发表于 2025-3-28 05:53:14
The Results for Process Optimization of Bulk Material Filling into the Bucket to Minimize Abrasiveno part is everlasting. We need to employ scientific findings and measurements to set the service life according to relevant maintenance schedules. When a component has an insufficient service life, machine manufacturers may blame the type and strength of materials. However, this need not be the on
演讲
发表于 2025-3-28 08:28:32
http://reply.papertrans.cn/29/2811/281094/281094_39.png
脾气暴躁的人
发表于 2025-3-28 13:03:08
http://reply.papertrans.cn/29/2811/281094/281094_40.png