碎石
发表于 2025-3-23 09:51:27
Parameter Estimation from Motion Tracking Data problems. The motion capture system is providing the data for the user’s motion recognition, but the uncertainty remains in obtaining the exact motion of the user due to the deformations, especially when the markers are attached to the clothes or to the skin. This paper address the question how can
condescend
发表于 2025-3-23 13:51:38
Modeling and Simulating Lifting Task of Below-Knee Amputeesety and health to those BKAs. Often healthy parts of BKAs might be hurt due to extra and asymmetric force exertion compensating for deficiency of disabled body parts. To prevent further hurt, a validated biomechanical model describing lifting is essential to analyze lifting behavior of those handica
CLEFT
发表于 2025-3-23 21:07:50
http://reply.papertrans.cn/28/2795/279410/279410_13.png
Density
发表于 2025-3-24 01:38:47
Experience Factors Influence on Motion Technique of “The Way of Tea” by Motion Analysisre captured by High-speed camera system. In order to verify the correct motion technique, a tea master and three people were employed as expert and beginner, and two kinds of motion techniques and moving tracks were summarized and compared during the whole tea making process. The expert’ motion can
FLAX
发表于 2025-3-24 04:32:43
http://reply.papertrans.cn/28/2795/279410/279410_15.png
BILL
发表于 2025-3-24 09:54:06
http://reply.papertrans.cn/28/2795/279410/279410_16.png
LAY
发表于 2025-3-24 11:00:16
http://reply.papertrans.cn/28/2795/279410/279410_17.png
不近人情
发表于 2025-3-24 18:00:56
http://reply.papertrans.cn/28/2795/279410/279410_18.png
施加
发表于 2025-3-24 21:47:13
Energy Complexity of Computationults. Then the linear regression equations are established, which can provide technical support for optimizing anthropometric measurements. Application of this research finding in anthropometry can effectively reduce the working difficulty, shorten the working hours and cut capital investment. It ca
排他
发表于 2025-3-24 23:37:32
Eva Graversen,Iain Phillips,Nobuko Yoshidapeople, experimental measurements were designed and carried out. The measuring parameters included right thumb size, comfortable control area and comfortable control angle range. The data showed that with the increase of control angle (from 0° to 90°), the thumb’s comfortable control far-end limit a