KEGEL
发表于 2025-3-28 17:16:12
Plasma Control Concepts for ITERThe ITER control specifications are in terms of goals and limitations among which are:
DAMP
发表于 2025-3-28 22:31:22
http://reply.papertrans.cn/28/2708/270749/270749_42.png
一瞥
发表于 2025-3-29 01:52:04
http://reply.papertrans.cn/28/2708/270749/270749_43.png
promote
发表于 2025-3-29 03:31:35
https://doi.org/10.1007/978-94-017-9918-8ve is to measure density profiles with high spatial and temporal resolution. Other important measurements are the detection of ELMs and multifaceted axisymmetric radiation from the edge (MARFES), and flame front location. Divertor plate erosion can also, in principle, be measured based on distance measurements.
BARB
发表于 2025-3-29 09:41:54
http://reply.papertrans.cn/28/2708/270749/270749_45.png
垄断
发表于 2025-3-29 15:29:31
http://reply.papertrans.cn/28/2708/270749/270749_46.png
septicemia
发表于 2025-3-29 16:21:27
http://reply.papertrans.cn/28/2708/270749/270749_47.png
curriculum
发表于 2025-3-29 21:45:00
Overview of the ITER Diagnostic System The results of an assessment of the overall performance of the System are presented and the areas where the probable performance falls below the target specifications are identified. The design and R&smp;D plans which are in place to address the shortcomings are outlined.
朋党派系
发表于 2025-3-30 00:33:12
Reflectometry in the ITER Divertorve is to measure density profiles with high spatial and temporal resolution. Other important measurements are the detection of ELMs and multifaceted axisymmetric radiation from the edge (MARFES), and flame front location. Divertor plate erosion can also, in principle, be measured based on distance measurements.
SPER
发表于 2025-3-30 05:00:02
ECE Diagnostic on ITER in the Presence of Superthermalsh a generalized Kirchhof’s law is valid. On varying both the spatial profiles and the position of the superthermals, the feasibility of ..-measurements using the first harmonic ordinary-mode as well as the second harmonic extraordinarymode is assessed in respect to the accuracy requirement set by ITER.