雀斑
发表于 2025-3-23 12:26:39
Molecular Beam,e and the heating wires, as little gas as possible should adsorb. Hence the ideal intensity profile of the Molecular Beam on the sample is a top-hat profile, as shown in Fig. 4.1. The MB should have a constant core intensity over an area with diameter 3.5 mm, a size suitable for most of the samples
savage
发表于 2025-3-23 14:09:58
http://reply.papertrans.cn/28/2701/270019/270019_12.png
Patrimony
发表于 2025-3-23 19:50:10
Results,ak gas into the Reservoir as they were not ready at the time of the test. The theoretical MB properties in this chapter were calculated with the equivalent Orifice diameter .. = 38 μm of the real Orifice in use (see Section 4.4.2, Page 54), not the conceptual Orifice diameter of 50 μm.
THE
发表于 2025-3-24 00:42:59
http://reply.papertrans.cn/28/2701/270019/270019_14.png
摇摆
发表于 2025-3-24 03:24:41
http://reply.papertrans.cn/28/2701/270019/270019_15.png
BACLE
发表于 2025-3-24 06:52:48
http://reply.papertrans.cn/28/2701/270019/270019_16.png
臭名昭著
发表于 2025-3-24 14:08:34
978-3-658-13535-5The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Fachmedien Wies
蔑视
发表于 2025-3-24 18:55:32
http://reply.papertrans.cn/28/2701/270019/270019_18.png
Fabric
发表于 2025-3-24 20:48:42
http://reply.papertrans.cn/28/2701/270019/270019_19.png
Euphonious
发表于 2025-3-25 01:27:18
http://reply.papertrans.cn/28/2701/270019/270019_20.png