Resistance
发表于 2025-3-25 03:56:59
R. Rieger,A. Michaelis,H. Stubbe Since these algorithms are based on nominal systems, there is no guarantee that the robustness of system performance will be assured in the presence of uncertainties. To overcome this and avoid any trouble we may have, we should take into account system uncertainties during the analysis and the des
Ebct207
发表于 2025-3-25 10:42:33
http://reply.papertrans.cn/27/2694/269351/269351_22.png
BOAST
发表于 2025-3-25 13:11:54
https://doi.org/10.1007/978-3-642-53295-5ider a hybrid system with.modes, that is.{1, 2, • • •, N}. Mode switching is assumed to be governed by a continuous-time Markov process {r.t > Of taking values in the state space.and having the following infinitesimal generator
凝视
发表于 2025-3-25 18:24:13
https://doi.org/10.1007/978-3-642-53295-5. The dynamic was assumed to be free of uncertainties. But since in practice uncertainties cannot be neglected, this chapter deals with the robust stability and stabilizability of the class of linear uncertain system with Markov jumps and time delay. For this purpose, consider a hybrid system with.m
Mystic
发表于 2025-3-25 22:58:35
http://reply.papertrans.cn/27/2694/269351/269351_25.png
Mundane
发表于 2025-3-26 02:35:15
R. Rieger,A. Michaelis,H. Stubben the neighborhood of the operating point. For many reasons well known in the control community, the systems parameters and the operating point change with time and therefore, the fixed linear Markov jump model is not adequate to guarantee robustness of system performance. Besides this, the system c
禁止,切断
发表于 2025-3-26 06:54:04
R. Rieger,A. Michaelis,H. Stubbelity (using different types of controllers), 7-t.control, filtering, and robustness of the techniques therein. The tools presented in these chapters will be efficient for dynamical time delay linear systems, but will fail for nonlinear ones. Therefore an alternative for solving stability and stabili
intricacy
发表于 2025-3-26 08:38:58
Introduction,e defined as a group of systems in which there exists a time delay between the instant the input or the control to the system is applied and the instant or moment effect is observed. In most cases, the time delay cannot be neglected; it should be taken into account during the design phase of an experiment if we want to assure good performance.
无所不知
发表于 2025-3-26 15:16:36
http://reply.papertrans.cn/27/2694/269351/269351_29.png
秘密会议
发表于 2025-3-26 18:52:11
Control Engineeringhttp://image.papertrans.cn/d/image/269351.jpg