作茧自缚
发表于 2025-3-25 05:38:09
http://reply.papertrans.cn/27/2691/269048/269048_21.png
Pepsin
发表于 2025-3-25 10:48:36
Klaus Bichler,Ralf Krohn,Peter Philippint of yield is tolerated, this is described as shakedown. Moreover the shapes and details are highly standardised and well proven by previous service data and near full-size specimen tests. Weight as such is not critical. The pressure to economise, though laudable within limits, is aggravated by the
exclusice
发表于 2025-3-25 15:35:56
Gabler Kompakt-Lexikon Logistikonditions. The De Havilland Comet was the first pressurised airliner designed in the United Kingdom. The fuselage was treated as a pressure vessel under repeated loading since it was blown to a pressure of about 0.9 bar when the outside pressure was approximately 0.16 bar. Because there was some unc
lattice
发表于 2025-3-25 16:20:59
http://reply.papertrans.cn/27/2691/269048/269048_24.png
脆弱带来
发表于 2025-3-25 20:46:22
Klaus Bichler,Ralf Krohn,Peter PhilippiStress concentrations due to changes of shape arise in most designs. An awareness of the severity of such concentrations is helpful in making design decisions. It is unrealistic to say that all corners must be avoided. We must accept that there will be stress-raisers, for good reasons.
把手
发表于 2025-3-26 03:53:57
http://reply.papertrans.cn/27/2691/269048/269048_26.png
Priapism
发表于 2025-3-26 06:09:26
Klaus Bichler,Ralf Krohn,Peter Philippiess due to this weight is something like 40 N/mm. on top of the duty stresses due to load, inertia and curvature. When we consider tethering a weather balloon, dredging samples from the sea bed or drilling deep holes, we need to consider tailoring the rope or drill pipe to the duty in more detail.
两栖动物
发表于 2025-3-26 11:14:50
http://image.papertrans.cn/d/image/269048.jpg
BROW
发表于 2025-3-26 13:41:50
More Advanced Tension Problems,ess due to this weight is something like 40 N/mm. on top of the duty stresses due to load, inertia and curvature. When we consider tethering a weather balloon, dredging samples from the sea bed or drilling deep holes, we need to consider tailoring the rope or drill pipe to the duty in more detail.
诱惑
发表于 2025-3-26 17:15:19
Introduction, need the ability to select efficient and safe structural solutions for a given duty. If we merely study analysis of standard cases we may fail to develop either the creative aspect or the knack of spotting weaknesses before they arise in the real object. This point is well illustrated by figure 1.1