Curmudgeon
发表于 2025-3-25 05:35:03
http://reply.papertrans.cn/27/2688/268727/268727_21.png
不遵守
发表于 2025-3-25 10:13:40
http://reply.papertrans.cn/27/2688/268727/268727_22.png
COWER
发表于 2025-3-25 13:09:35
https://doi.org/10.1007/978-3-030-76533-0sheet metal forming; Presses and Auxiliary Equipment; principles of clamping; grinding; broaching; weldin
COLIC
发表于 2025-3-25 18:34:50
Design of Locatorsents about the three axes. In order to provide constraints to the body, which has parallel and right-angled plane faces, six pegs are provided, three pegs in the .–. plane, two pegs in the .–. plane and one peg in the .–. plane.
邪恶的你
发表于 2025-3-25 20:39:49
Design of Clampsb) the clamping device should be quick acting as the loading and unloading time should be as quick as possible; (c) when subjected to excessive vibration or chatter, the clamps should be firm and should not loosen up; (d) the clamp should not damage the workpiece.
先驱
发表于 2025-3-26 01:58:13
Drilling Jigserefore, tool designers and production engineers give utmost importance to proper location of the holes in the workpiece as well as on the machine, with the required tolerances and surface finish. It may be seen that the location and size of the hole are two important facets of mass production of components.
Angiogenesis
发表于 2025-3-26 07:06:47
http://reply.papertrans.cn/27/2688/268727/268727_27.png
贵族
发表于 2025-3-26 10:49:33
Other Types of Fixtureser types of the fixtures particularly turning fixtures need the same amount of attention in the design and construction. In the case of broaching fixtures, the same does not need any specific clamping devices as the broaching action itself will provide the requisite clamping force on to the component.
薄膜
发表于 2025-3-26 12:54:08
http://reply.papertrans.cn/27/2688/268727/268727_29.png
使绝缘
发表于 2025-3-26 18:31:13
http://reply.papertrans.cn/27/2688/268727/268727_30.png