explicit
发表于 2025-3-30 10:25:32
http://reply.papertrans.cn/27/2687/268671/268671_51.png
macabre
发表于 2025-3-30 15:54:13
Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membranes: Effect formance of membranes. In this study, flat sheet asymmetric polysulfone/cellulose acetate phthalate/polyvinylpyrrolidone (PSf/CAP/PVP) blend membranes were fabricated at different evaporation time in the range of 0–20 s to investigate the effect of the evaporation time on characteristics of the blen
表脸
发表于 2025-3-30 20:21:04
,Influence of Deadrise on the Dynamic Instability of a 14 Meters Custom Boat in Regular Waves,ine to be examined from the early stage of the design process. This paper will focus on the transverse dynamic instability of small crafts that have been performed by the authors for a custom boat with three different deadrise angles. The effects of longitudinal center of gravity, LCG positions, and
Ascribe
发表于 2025-3-31 00:30:32
http://reply.papertrans.cn/27/2687/268671/268671_54.png
ostrish
发表于 2025-3-31 03:39:58
The Optical Properties of Polyvinyl Alcohol (PVA), Phosphorylated Polyvinyl Alcohol (PPVA), and Phon at 80 ℃. The optical properties of all samples were examined using UV–visible and photoluminescence (PL) spectroscopy. The absorption peaks are blue-shifted with the addition of phosphate groups. The addition of phosphate produced a broad peak and increased the optical band gap to 5.75 eV in PPVA;
MAUVE
发表于 2025-3-31 07:44:04
Tensile and Corrosion Resistance Studies of MXenes/Nanocomposites: A Review,rsibility and metallic conductivity. MXenes appear to be promising fillers for polymer nanocomposites, and data from several studies suggest that this promising material could significantly improve the tensile strength and modulus by 314% and 89%, respectively, when incorporated into a polymer matri
不近人情
发表于 2025-3-31 13:00:22
http://reply.papertrans.cn/27/2687/268671/268671_57.png
单色
发表于 2025-3-31 16:44:40
The Degradation of Mechanical Properties Caused by Acetone Chemical Treatment on 3D-Printed PLA-Cared deposition modelling (FDM) technique. In this research, PLA-carbon fibre’s tensile and dynamic mechanical properties were studied for six different treatment time (0, 60, 100, 120, 180, 220 s). The results suggested that retained acetone significantly reduced the mechanical properties of the PLA-
冲突
发表于 2025-3-31 21:24:01
http://reply.papertrans.cn/27/2687/268671/268671_59.png
monologue
发表于 2025-3-31 22:04:39
http://reply.papertrans.cn/27/2687/268671/268671_60.png