BET
发表于 2025-3-23 13:21:56
http://reply.papertrans.cn/27/2687/268627/268627_11.png
夸张
发表于 2025-3-23 14:41:29
Textbook Apr 2014Latest editionrequency-domain representation helps you to determine at which frequencies a signal potentially leads to radiated emissions..As an EMC design engineer and troubleshooter, it is crucial to understand the dependencies and relationship between the time-domain and the frequency-domain.
卵石
发表于 2025-3-23 21:08:02
https://doi.org/10.1007/978-3-540-45626-1lved or not: .or according to the noise current type: .or according to the suppression of transients: .or according to the implementation in hardware or software: .In this chapter, all the filter types listed above are explained in further detail.
打击
发表于 2025-3-23 23:59:41
http://reply.papertrans.cn/27/2687/268627/268627_14.png
关节炎
发表于 2025-3-24 03:45:44
http://reply.papertrans.cn/27/2687/268627/268627_15.png
Nucleate
发表于 2025-3-24 08:14:25
Decibel,In the field of EMC, the decibel must be understood. One advantage of decibels is that a gain of 10 dB means a gain of 10 dB for current, voltage, and power likewise. This fact helps to prevent misinterpretations and helps to simplify things. This is the main reason why EMC and high-frequency system
DENT
发表于 2025-3-24 12:00:48
http://reply.papertrans.cn/27/2687/268627/268627_17.png
cogent
发表于 2025-3-24 18:09:51
Transmission Lines,tical length .. , impedance matching (., ., .) must be considered to prevent reflections and ringing, thus preventing unwanted radiated emissions and bad signal quality—a signal integrity topic..This chapter introduces transmission lines and their most important properties.
温和女人
发表于 2025-3-24 19:17:42
Antennas,nd Maxwell’s Equations..The formulas and statements in this chapter apply to the far-field (not the near-field), free-space, matched impedances (of antennas and receiver/transmitter equipment), and matched polarization (of the electromagnetic waves and the antenna polarization).
单挑
发表于 2025-3-24 23:14:18
Components,ts. Therefore, in this chapter, the high-frequency behavior and other undesirable effects of conductors (wires, cables, PCB traces), resistors, capacitors, inductors, ferrite beads, common-mode chokes, baluns, varistors, and TVS diodes are presented.