AND
发表于 2025-3-23 11:39:36
http://image.papertrans.cn/d/image/268625.jpg
DEMN
发表于 2025-3-23 14:41:06
http://reply.papertrans.cn/27/2687/268625/268625_12.png
高度
发表于 2025-3-23 18:52:59
http://reply.papertrans.cn/27/2687/268625/268625_13.png
Aggrandize
发表于 2025-3-24 00:08:32
http://reply.papertrans.cn/27/2687/268625/268625_14.png
KIN
发表于 2025-3-24 04:24:17
http://reply.papertrans.cn/27/2687/268625/268625_15.png
ABYSS
发表于 2025-3-24 06:51:19
https://doi.org/10.1007/978-3-031-55182-6nly require an adequate knowledge of the stresses and strains resulting from the loading and environmental factors involved in the duty required of the component. These stresses and strains are used to make further assessments of, for example, the strength and deformations of the components and in t
文件夹
发表于 2025-3-24 10:39:44
http://reply.papertrans.cn/27/2687/268625/268625_17.png
典型
发表于 2025-3-24 14:57:09
http://reply.papertrans.cn/27/2687/268625/268625_18.png
小丑
发表于 2025-3-24 21:10:56
https://doi.org/10.1007/978-3-031-55182-6which cannot be evaluated entirely by continuum methods without taking into account the specific form of the local deviation. Problems involving crack-like defects therefore require a special analytical tool which includes the presence of the defect in the mathematical model. This tool is fracture m
Bridle
发表于 2025-3-25 02:42:55
Book 1995Latest editionful and easily understood methods for dealing with the creep of components operating under conditions met in practice. When the first edition was written, we could not claim that the methods which were introduced were well-tried. They were somewhat conjectural, although firmly based, but not suffici