信徒
发表于 2025-3-25 07:04:30
Variable Pitch Tube Layout Concept for Shell and Tube Heat Exchangerves from inner zone to outer periphery, heat transfer coefficient variation is reduced to 1.5:1 at any cross section of exchanger. The flow distribution has been studied using network analysis and is used to evaluate different configurations.
滔滔不绝的人
发表于 2025-3-25 07:48:45
http://reply.papertrans.cn/27/2686/268591/268591_22.png
扫兴
发表于 2025-3-25 14:07:44
Dispersion Model for Divided-Flow Heat Exchangerperature profiles are derived for the 1-1 divided-flow heat exchanger. Measurements are carried out on a segmentally baffled 1-1 divided-flow heat exchanger with various clearances between segmental baffles and shell, in order to investigate the relationship between the dispersion factor and the flow pattern.
捏造
发表于 2025-3-25 17:58:56
https://doi.org/10.1007/978-1-349-12450-3ents are discussed. Next, a group of problems which are not easily identified in the course of the usual design process, is analyzed. These include items like pressure drop to heat transfer conversion effectiveness, pressure drop utilization, problems connected with surface over-design due to exagge
真
发表于 2025-3-25 22:33:52
http://reply.papertrans.cn/27/2686/268591/268591_25.png
失望未来
发表于 2025-3-26 03:11:35
http://reply.papertrans.cn/27/2686/268591/268591_26.png
折磨
发表于 2025-3-26 06:16:39
http://reply.papertrans.cn/27/2686/268591/268591_27.png
fluffy
发表于 2025-3-26 08:42:10
http://reply.papertrans.cn/27/2686/268591/268591_28.png
maladorit
发表于 2025-3-26 13:37:11
http://reply.papertrans.cn/27/2686/268591/268591_29.png
冷淡一切
发表于 2025-3-26 19:58:14
Settings and Local Notificationsss flow rate on the shellside, variable entrance location of the shellside flow and piecewise variation of heat transfer coefficient (or NTU), considering shellside maldistribution such as bypassing and leakage. Especially, the explicit formulas for calculating thermal effectivenesses as well as tem