歌唱队
发表于 2025-3-25 03:45:29
http://reply.papertrans.cn/27/2686/268586/268586_21.png
净礼
发表于 2025-3-25 09:20:23
Biological Fouling: Basic Science and Modelsbtained results confirm improvement of the required design criteria of the sewing mechanism in this study. It is also concluded that the optimized mechanism has 35% less needle Jerk and 20% reduction in term of the transmission angle index (TA) than the one for the Juki machine.
天真
发表于 2025-3-25 12:09:56
Biological Fouling: Basic Science and Modelsas slightly more important for the case using an (.) inline plastic short-section than that using an (.) one. Furthermore, results evidenced that other factors influencing the surge attenuation rate were related to the short-section dimensions.
Chronic
发表于 2025-3-25 15:58:21
https://doi.org/10.1007/978-1-4302-0158-8of the proposed technique in attenuating excessive high- and low-pressure surges. However, they evidenced that this technique induced excessive period spreading, thus affecting negatively the operational procedures of the hydraulic system. Lastly, this study provided an estimate of the near-optimal values of the short-section diameter and length.
brassy
发表于 2025-3-25 22:56:30
https://doi.org/10.1007/978-1-4302-0158-8ositive and negative surge magnitude attenuation was slightly more important for the case of a short penstock made of (.) material than that using an (.) material. Ultimately, it was observed that other factors contributing to the attenuation rate depended upon the short-penstock length and diameter.
禁止,切断
发表于 2025-3-26 04:14:08
The Critical Modeling Modifiersns. The finite-element software ‘‘Abaqus’’ is used to simulate the humidity diffusion through the composite material. The comparison between the experimental and numerical results shows that the model can predict the hygrothermal behavior of the polyester/glass fiber composite.
CRATE
发表于 2025-3-26 07:33:25
http://reply.papertrans.cn/27/2686/268586/268586_27.png
AMITY
发表于 2025-3-26 09:28:45
Two-way ASP.NET/Flash Communication,od of characteristics (MOC) of specified time intervals along with Nelder-Mead optimization algorithm for the estimation of the flaw parameters (size and location). The numerical obtained results have shown a good agreement with the experimental data for the detection and the location of leaks.
洞穴
发表于 2025-3-26 14:59:31
http://reply.papertrans.cn/27/2686/268586/268586_29.png
鸵鸟
发表于 2025-3-26 20:30:32
http://reply.papertrans.cn/27/2686/268586/268586_30.png