持续
发表于 2025-3-26 23:31:32
2195-4356 , dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings 978-3-642-43330-6978-3-642-37143-1Series ISSN 2195-4356 Series E-ISSN 2195-4364
变形
发表于 2025-3-27 03:18:51
http://reply.papertrans.cn/27/2686/268584/268584_32.png
paragon
发表于 2025-3-27 08:51:52
Optimization of the Combustion in Large Marine Diesel Engine by Controlling the Exhaust GasZAV 40S with 8200 Kw nominal power, using the engine shop trials data. Engine manufacturers provide charts on relationships gas flow, power etc. The work is based on these curves for modeling the control system.Simulation is carried out using Matlab and Simulink and simulation results are presented to illustrate the performances of this approach.
anesthesia
发表于 2025-3-27 09:36:01
http://reply.papertrans.cn/27/2686/268584/268584_34.png
Leaven
发表于 2025-3-27 17:05:49
On the Kinematics of Spherical Parallel Manipulators for Real Time Applicationsantee motion continuity. The SPM structure kinematics is then detailed and a strategy, based on Newton Raphson method, is proposed to solve these models. Experimental results are presented to validate the proposed approach.
非秘密
发表于 2025-3-27 19:13:05
Defect Detection through Stochastic Wave Finite Element Methodent, simulated as the defect (crack). Diffusion matrix for uncertain media through stochastic wave finite element method is studied in this paper. The forced response following a vibratory excitation is computed to investigate the defect detection. The computational efficiency of the method is demonstrated by comparison with MC simulation.
obeisance
发表于 2025-3-28 01:43:07
https://doi.org/10.1007/978-3-642-97208-9ZAV 40S with 8200 Kw nominal power, using the engine shop trials data. Engine manufacturers provide charts on relationships gas flow, power etc. The work is based on these curves for modeling the control system.Simulation is carried out using Matlab and Simulink and simulation results are presented to illustrate the performances of this approach.
卵石
发表于 2025-3-28 04:13:29
Ausblick und kritische Würdigungems modeled with PDEs. An application of the method to a case of 1D thermal modeling and by comparing results to the finite element method, it is shown that this approach guarantees both fast simulation and accurate results.
最有利
发表于 2025-3-28 06:37:57
Conference proceedings 2013ur previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of
媒介
发表于 2025-3-28 12:46:51
2195-4356 cademia and industry.Written by leading experts in the field.The 5.th. International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the field