languor
发表于 2025-3-30 08:22:04
http://reply.papertrans.cn/27/2649/264837/264837_51.png
高谈阔论
发表于 2025-3-30 13:34:06
Use of the Elastic Predictor-Plastic Corrector Method for Integrating Finite Deformation Plasticityequations governing the material response is highly nonlinear. To integrate these equations, particular algorithms have been developed, the method of elastic predictor and plastic corrector being often used. This method has turned out to be a very efficient tool, when small deformation plasticity i
释放
发表于 2025-3-30 19:03:16
http://reply.papertrans.cn/27/2649/264837/264837_53.png
Nebulous
发表于 2025-3-30 23:52:01
Identification of Material Parameters for Inelastic Constitutive Models: Stochastic Simulationdata using an appropriate optimization algorithm. However, measurement failures and differences in the specimens lead to uncertainties in the determined parameters. Since the amount of test data is not sufficient for a statistical analysis, a method of stochastic simulation is introduced in order to
Intend
发表于 2025-3-31 02:34:36
A Simple Model for Describing Yield Surface Evolution During Plastic Flow. For metallic materials, deformation induced anisotropy is reflected above all by translation, rotation and distortion of the yield surface. This has been confirmed by several experimental investigations independent of the way the yield point is defined. In the present paper a simple, thermodynamic
Ophthalmoscope
发表于 2025-3-31 06:27:04
Damage and Failure of Ceramic Metal Composites: Experimental and Numerical Investigationses, a, metal layer between two ceramic supports and an inter-penetrating network, correlated to two different failure modes are studied in detail. Cavitation is found to be one significant mode of (internal) damage, which decreases the strength of the composite and subsequently leads to failure. Int