growth-factor
发表于 2025-3-23 10:02:30
Jessica C. Bishop-Royse,Isaac W. Ebersteinr, the basic and advanced problems of second-order and higher-order circuits are presented. A second-order circuit comprises two energy-saving components (two capacitors, two inductors, or a combination of one capacitor and one inductor) and a combination of other components including resistors, ind
Serenity
发表于 2025-3-23 17:27:02
E. B. Mancha Ph.D.,M. Zey Ph.D.cts of the previous chapters are applied. Moreover, the concepts of quality factor, circuit responses, impulse function, time-dependent second-order homogeneous and nonhomogeneous differential equations, characteristic equation, and general solution of a second-order differential equations are expla
Incommensurate
发表于 2025-3-23 19:53:17
http://reply.papertrans.cn/27/2601/260044/260044_13.png
搜集
发表于 2025-3-23 22:44:37
Applied Delay Differential Equationsen circuit voltage, short-circuit current, Thevenin voltage, Thevenin resistance, Norton current, and Norton resistance are explained. In addition, this chapter shows how to deal with circuit components like resistors, dependent current and voltage sources, and independent current and voltage sources.
原谅
发表于 2025-3-24 05:56:57
http://reply.papertrans.cn/27/2601/260044/260044_15.png
使增至最大
发表于 2025-3-24 08:25:29
http://reply.papertrans.cn/27/2601/260044/260044_16.png
面包屑
发表于 2025-3-24 12:05:46
Problems: Circuit Components, Methods of Circuit Analysis, and Circuit Theorems,ifficulty levels (easy, normal, or hard) and calculation amounts (small, normal, or large). Additionally, the problems are ordered from the easiest problem with the smallest calculations to the most difficult problems with the largest calculations.
涂掉
发表于 2025-3-24 17:00:42
http://reply.papertrans.cn/27/2601/260044/260044_18.png
思乡病
发表于 2025-3-24 21:15:56
Jessica C. Bishop-Royse,Isaac W. Ebersteingorized in different levels based on their difficulty levels (easy, normal, or hard) and calculation amounts (small, normal, or large). Additionally, the problems are ordered from the easiest problem with the smallest calculations to the most difficult problems with the largest calculations.
Endoscope
发表于 2025-3-25 00:17:39
Problems: First-Order Circuits,s based on their difficulty levels (easy, normal, or hard) and calculation amounts (small, normal, or large). Additionally, the problems are ordered from the easiest problem with the smallest calculations to the most difficult problems with the largest calculations.