催眠药
发表于 2025-3-30 10:55:36
Conference proceedings 2024 fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations..
光亮
发表于 2025-3-30 13:29:27
Algorithmen und Datenstrukturen friction to rolling friction. The skin friction resistance in the influence range of the riblet is reduced; the flow in the riblet gives the originally static wall fluid an initial velocity so that the shear velocity in the shear layer near the wall is smaller, and the viscosity in the entire bound
outrage
发表于 2025-3-30 17:24:02
Algorithmen und Datenstrukturenditions of the target area. This model simulated the fracture morphology and oil production under different construction parameters. Utilizing a large amount of numerical simulation data, a multivariate nonlinear regression method was employed to construct an energy consumption prediction model unde
Condense
发表于 2025-3-30 20:54:34
Algorithmen und Datenstrukturenmeters are not within the optimal ranges, permeability improving rates decrease significantly compared to those treated by nozzles whose flow channel parameters are within the optimal ranges. The feasibility tests verified the rationality of numerical calculation, and show that the fluid cavitation
开花期女
发表于 2025-3-31 03:24:04
https://doi.org/10.1007/978-3-662-55650-4ses. The decrease in peak magnetic induction intensity speeds up with longer downhole electrode lengths. Considering the insertion capability of rigid downhole electrodes, an optimization of electrode length for a well showed that possibility within the borehole decreases when electrode length excee
伪造者
发表于 2025-3-31 08:06:02
Christoph Meinel,Thorsten Theobaldag & torque model, and it is applied to a case study of an extended-reach well. The results show that the change of flow rate, rate of penetration (.) and rotational speed affects the hole cleaning and further affects the torque loss caused by cuttings and the ground torque in extended-reach drillin
千篇一律
发表于 2025-3-31 12:34:55
http://reply.papertrans.cn/25/2423/242283/242283_57.png
OTHER
发表于 2025-3-31 17:01:39
https://doi.org/10.1007/978-3-642-58773-3the words around POI, the user vector with enhanced location features is generated, which improves the geolocation accuracy of social users. On the Weibo dataset, the proposed Method is compared with four existing typical methods, PaQL, SeFG, MNB-PART, and MNB-LGR. The results show that the proposed
Hemiparesis
发表于 2025-3-31 18:47:05
https://doi.org/10.1007/978-3-322-96663-6icate that under cyclic power load, the lifetime of solder joints is influenced by the combined effects of power cycling and component layout. Smaller component spacing correlates with higher average solder joint temperatures, with the high-temperature zone closer to the board center, while the aver
Hallmark
发表于 2025-4-1 01:34:05
http://reply.papertrans.cn/25/2423/242283/242283_60.png