几何学家
发表于 2025-3-25 05:57:33
http://reply.papertrans.cn/25/2423/242237/242237_21.png
Limited
发表于 2025-3-25 08:45:19
Air Traffic Management and Systemsed in 2 min at a microwave input power of 0.9 kW. The smallest hole of 0.5 mm diameter was drilled in borosilicate glass and soda-lime glass; however, defects were present around hole. Use of dielectric in dynamic mode helps in reducing the defects like heat affected zone, overcut; but machining time gets increased slightly.
Acclaim
发表于 2025-3-25 11:40:27
http://reply.papertrans.cn/25/2423/242237/242237_23.png
减少
发表于 2025-3-25 18:33:14
Introduction to Microwave Heating and Its Applications in the Composite Industry,al future developments. The chapter also discusses various techniques employed in microwave-assisted composite processing and highlights notable research studies and industrial applications. Overall, this chapter aims to provide readers with a comprehensive understanding of microwave heating and its relevance in the composite industry.
sphincter
发表于 2025-3-25 22:02:38
,Drilling of Ceramics Using Microwave Energy at 2.45 GHz,ed in 2 min at a microwave input power of 0.9 kW. The smallest hole of 0.5 mm diameter was drilled in borosilicate glass and soda-lime glass; however, defects were present around hole. Use of dielectric in dynamic mode helps in reducing the defects like heat affected zone, overcut; but machining time gets increased slightly.
类人猿
发表于 2025-3-26 00:30:52
Future Trends of Microwave Processing in Composite Industries,state-of-the-art and future trends in microwave processing of FRP composites. It explores the developments in this field and highlights the challenges encountered during the microwave processing of composites.
不适当
发表于 2025-3-26 04:47:07
http://reply.papertrans.cn/25/2423/242237/242237_27.png
沉默
发表于 2025-3-26 12:22:53
http://reply.papertrans.cn/25/2423/242237/242237_28.png
Endearing
发表于 2025-3-26 12:42:02
Application of Microwaves in Development of Metal Matrix Composites,r addition of reinforcement particles, and further stirring the mixture of aluminum and silicon carbide to obtain a homogeneous distribution of the reinforcements. The developed metal matrix composite is characterized for the phases, microstructure, tensile properties and hardness.
Anticonvulsants
发表于 2025-3-26 20:43:35
Chronological Development in Microwave Heating Technology: Design and Applications,nents and the qualities connected with those products for various applications. The development of sustainable product generation, as well as the influence on the environmental elements of a range of production methods using microwave heating technology has been discussed.