CLOUT
发表于 2025-3-25 06:39:36
http://reply.papertrans.cn/25/2419/241808/241808_21.png
轻打
发表于 2025-3-25 10:09:53
Cyber-Physical System of a Polymer Composition Optimization Based on the Solution of a Fuzzy Programlution of which is based on the approach with alpha levels. A computational experiment illustrates the proposed solution method. Data visualization allows restoring the membership function and obtaining a fuzzy concentration vector for solving a fuzzy programming problem.
慢慢流出
发表于 2025-3-25 14:08:06
Parameters of Roll Contact Curves of Two-Roll Modulese angle of inclination of the material to the line of centers. It was determined that an increase in the radii of the rolls and the projection of external forces on the axis, and a decrease in the projection of external forces on the axis led to an increase in the slip zone and a decrease in the no-slip zone.
旧石器
发表于 2025-3-25 18:29:43
http://reply.papertrans.cn/25/2419/241808/241808_24.png
表示向前
发表于 2025-3-25 21:55:47
http://reply.papertrans.cn/25/2419/241808/241808_25.png
ACME
发表于 2025-3-26 03:06:03
Parameters Optimization of Roller Squeezing of Leatherueezing machines with low velocities and small diameters. It was found that with an increase in the specific pressure, the residual moisture content in the leather semi-finished product decreases and asymptotically approaches a certain value.
比喻好
发表于 2025-3-26 06:49:01
http://reply.papertrans.cn/25/2419/241808/241808_27.png
纹章
发表于 2025-3-26 11:59:16
http://reply.papertrans.cn/25/2419/241808/241808_28.png
柏树
发表于 2025-3-26 15:02:42
http://reply.papertrans.cn/25/2419/241808/241808_29.png
ablate
发表于 2025-3-26 16:56:51
Dalila Patrizia Greco,Elio Borgonovinot depend on the inclination of the material layer fed to the center line and on the inclination of the upper roll relative to the vertical line. It was determined that with a decrease in the radius of the roll, with other parameters being the same, the maximum normal and shear stresses increase.