debacle
发表于 2025-3-25 06:09:53
http://reply.papertrans.cn/25/2411/241086/241086_21.png
租约
发表于 2025-3-25 08:41:22
http://reply.papertrans.cn/25/2411/241086/241086_22.png
Simulate
发表于 2025-3-25 12:24:07
Ethics and Reproductive Biologycous. Thus an uneven distribution of components may occur in some places of the mixture, which could be responsible for disturbances in the development of the process, not only when it is conducted on an industrial scale with the troublesome variation in mechanical properties of the final products,
Blatant
发表于 2025-3-25 17:19:35
http://reply.papertrans.cn/25/2411/241086/241086_24.png
反复拉紧
发表于 2025-3-25 22:22:24
https://doi.org/10.1007/978-1-4612-5823-0on it. In fact, the process is about the same as that already studied in the preceding chapter with the mould heated by air, with the main difference that the surrounding fluid is an oil. The numerical model is thus the same as the model described in the preceding chapter. It takes into account not
EXALT
发表于 2025-3-26 02:02:16
http://reply.papertrans.cn/25/2411/241086/241086_26.png
舰旗
发表于 2025-3-26 08:16:38
Numerical Analysis for a Parallelepiped with Three-Dimensional Heat Transfer and Cure Reaction,n and the thermal parameters are constant, for particular initial and boundary conditions. The problem is thus treated in a general way by considering heat transfer by conduction through the resin and heat evolved from the cure reaction. In this general case, the thermal parameters are temperature-dependent.
恃强凌弱
发表于 2025-3-26 10:59:45
http://reply.papertrans.cn/25/2411/241086/241086_28.png
FRONT
发表于 2025-3-26 13:17:23
Robert B. Taylor,Katharine A. MunningVarious classical cases of one-dimensional heat conduction in a medium bounded by two parallel planes are described in this chapter. The two parallel planes are located either between . = 0 and . = . with a thickness ., or between . = −. and . = . with a thickness of 2..
ATP861
发表于 2025-3-26 20:18:17
http://reply.papertrans.cn/25/2411/241086/241086_30.png