chuckle
发表于 2025-3-25 06:37:27
Studies in Computational Intelligenceas.The parameter, σ., varies with stress and temperature such that p ≃ 4 and Q. for particle-strengthened alloys is equal to the activation energy for creep of the single-phase matrix material. The physical significance of σ. is considered in terms of the mechanisms controlling creep in various stre
松紧带
发表于 2025-3-25 07:53:37
http://reply.papertrans.cn/24/2397/239662/239662_22.png
雪上轻舟飞过
发表于 2025-3-25 14:35:42
https://doi.org/10.1007/978-3-642-30154-4ormation and subsequent creep deformation. Strain controlled tests have been used to determine the influence of strain range, the number of cycles and the dwell period. The implications for structural behaviour and the prediction of stress relaxation are discussed..Some of the tests have been extend
Stress
发表于 2025-3-25 16:51:28
https://doi.org/10.1007/978-3-642-30154-4 investigations on the creep of them. These investigations, however, are almost all concerned with the case of thin shells, and few studies on thick shells are reported except for simple geometry such as cylinders and spheres in spite of their importance in engineering..In the present paper the anal
聪明
发表于 2025-3-25 20:34:03
https://doi.org/10.1007/978-3-319-65636-6umentation used in the model tests are outlined with reference to specific model components. Illustrative examples are included to show the range of application of creep models tests..It is concluded that models made from lead-antimony-arsenic alloys provide a powerful tool for validating analytical
aggravate
发表于 2025-3-26 00:44:23
Peter Pisár,Ján Huňady,Peter Balcoopic, and they represent a wide variety of approaches. With some over-simplification they might be labelled as Physical, Phenomenological, Philosophical, Engineering, Computational and Testing approaches, taken in order of presentation. They are all important to the development of our subject and, a
温和女人
发表于 2025-3-26 06:46:11
Jeng-Wei Lin,Shih-wei Liao,Fang-Yie Leuorkers. Whilst the Limit Load Reference Stress for a constant moment beam is essentially powerful the paper goes on to bring out its limitations for structures (e.g. a uniform cantilever) where a range of Reference Stresses may be more appropriate than a single stress and for structures which are st
小平面
发表于 2025-3-26 09:24:30
http://reply.papertrans.cn/24/2397/239662/239662_28.png
自负的人
发表于 2025-3-26 15:27:16
Vittorio Di Tomaso,Gianfrancesco D’Angeloe load in concrete bars is considered. It is shown that it is necessary to take into consideration the instantaneous damage. On the basis of the damage summation hypothesis, the integral presentation (3.3) of damage is introduced. Calculating the derivative ω the authors get the kinetic equation for
forestry
发表于 2025-3-26 17:41:07
Ming-Ge Li,Chih-Hung Hsub,Jun-Wei Liuce performed biaxial experiments at continuous linear stress trajectories. To account for creep induced anisotropy tests are made on prestrained specimens subjected subsequently to creep according to another trajectory. The influence of the basic stress invariants as well as the mixed invariants of s