MEAN
发表于 2025-3-30 09:49:21
Einleitung: Wirtschaftliche Rationalitätolid-solution strengthened nickel base alloys—alloy 59, alloy 625 and alloy 617—were studied with respect to the formation and propagation of hot cracking in the cast and wrought microstructure. Hot cracking tests were performed by PVR (programmable deformation crack) test to rank the cracking susce
反复无常
发表于 2025-3-30 14:57:34
Book 2016 the 4th InternationalCracking Workshop held in Berlin in April 2014. In the context of thisworkshop, the term “cracking” refers to hot cracking in the classical andprevious sense, but also to cold cracking, stress-corrosion cracking andelevated temp. solid-state cracking. A variety of different cr
Offstage
发表于 2025-3-30 20:19:20
http://reply.papertrans.cn/24/2393/239244/239244_53.png
Occipital-Lobe
发表于 2025-3-30 21:46:11
Einleitung: Wirtschaftliche Rationalitäts compared with IN52MSS, which were not sensitive to the formation of cracks of this type at the same range of deformation rates. The characteristics of plastic deformation of both the weld metals were determined using transmission microscopy and electron backscattered diffraction (EBSD).
Nomogram
发表于 2025-3-31 03:42:30
http://reply.papertrans.cn/24/2393/239244/239244_55.png
茁壮成长
发表于 2025-3-31 05:32:52
Towards Establishment of Weldability Testing Standards for Solidification Crackingement, it is at least possible to identify factors important to standards. This paper examines these factors, including: .This paper will examine and quantify these issues in detail, thus providing the reader with a comprehensive appreciation of all things that must be considered when preparing a standardized procedure for weldability testing.
Graduated
发表于 2025-3-31 11:05:51
Comparative Evaluation of Mesoscale Sensitivity to Crack Formation in Multi-pass Welds Using Wires Is compared with IN52MSS, which were not sensitive to the formation of cracks of this type at the same range of deformation rates. The characteristics of plastic deformation of both the weld metals were determined using transmission microscopy and electron backscattered diffraction (EBSD).
Pde5-Inhibitors
发表于 2025-3-31 14:37:43
http://reply.papertrans.cn/24/2393/239244/239244_58.png
Meditate
发表于 2025-3-31 18:13:24
http://reply.papertrans.cn/24/2393/239244/239244_59.png
anachronistic
发表于 2025-4-1 01:30:42
Evidenzbasierte Pädagogik – ein Déjà-vu?lding positions are given by slot-welds or welds near pre-deformed areas, for instance bending edges. Hence, it follows that increased local and global residual component stress caused cracking on reaching a solidification crack critical level, which is characterised by solidification crack initiation.